Samsung Galaxy Note4 is Samsung's flagship model this year, while maintaining excellent performance while also bringing a number of features, but as an Android phone, it is inevitable to brush the machine to make the phone more streamlined, especially for Samsung's mobile phones, Many features and applications are not really useful to consumers.
Samsung's mobile phone has a large number of versions, so it takes a lot of attention to brush the machine, but the general edition is obviously more suitable for most users.
First, the Brush machine attention
This brush machine tutorial applies to all Samsung_galaxy_note4 models.
Before brushing the machine need to do the following work to prevent:
1. Download Samsung General Brush machine tool Odin 3.09
2. Download and install Samsung Universal USB Drive 1.5.9.0
3. Back up your phone profile
4. Back up your phone's EFS
5. Make sure the electricity is about 50%
6. Data cable and PC side USB Interface No problem
Second, the Brush machine process:
Samsung Galaxy Note4 official firmware is divided into one package with five-piece or four-piece sets:
All-in-one: The firmware is a compressed package formatted as a suffix [. tar] or [. TAR.MD5];
Five-piece or four-piece set: The firmware is a five or four compressed package formatted as a suffix [. tar] or [. tar.md5].
First step
Extract the official firmware package, all remove the suffix format [. md5] as [. Tar];
Second Step
Open Samsung general Brush machine tools [odin3.09];
An All-in-one package firmware placement location is:
[AP]: A firmware file that places a suffix format of [. Tar];
Five sets each firmware placement location is:
[Pit]: Place suffix format as [. Pit] Partition file
[BL]: A firmware file that places the suffix format [. tar] at the beginning [BL]
[AP]: A firmware file that places the suffix format [. tar] at the beginning [AP]
[CP]: A firmware file that places the suffix format [. tar] at the beginning [CP]
[CSC]: A firmware file that places the suffix format [. tar] at the beginning [CSC];
Four sets each firmware placement location is:
[BL]: A firmware file that places the suffix format [. tar] at the beginning [BL]
[AP]: A firmware file that places the suffix format [. tar] at the beginning [AP]
[CP]: A firmware file that places the suffix format [. tar] at the beginning [CP]
[CSC]: A firmware file that places the suffix format [. tar] at the beginning [CSC];
Third Step
1. Turn off the mobile phone, [home+ Power key + volume key] at the same time press
2. Enter [Chinese and English: Warning UI interface],[volume key] Press, enter [coal digging mode] that is [brush machine mode]
3. Data cable Connection pc,[odin3.09] top left [id:com] appears blue
4. Click [odin3.09] the lower right [start] to start the brush machine:
A green progress bar appears at the top left of [odin3.09]
And so on [odin3.09] The top left appears blue [pass] Brush machine complete
In the brush machine process, do not have any action, static and other brush machine to complete,
3. Automatically completely into the mobile phone system, and then remove your USB cable, brush machine complete.