Seagate Discwizard Hard disk partitioning tool cracked 3TB hard drive partition

First we need to download a Seagate Discwizard tool.

Seagate Discwizard Software Installation Interface

Follow the steps to the next step until you finish

Click on the Seagate Discwizard software to install, select the first installation "Disc Discwizard", and then click "Next" step, until "complete", you can complete the installation.

Select the Expand Capacity Manager

After you open the Seagate Discwizard software, start to automatically scan all the disks and select "Expand Capacity Manager".

Select the "Allocate Space" button in the lower-right corner

Seagate Discwizard Software "Allocate space" is running

Using the software to simulate another hard drive, you need to select MBR or GPT format

With about 20 seconds to wait, we found that a 700-gigabyte capacity limit that was not identified had been lifted. The user can then go into Disk Manager to partition.

746.52GB space that was simulated

In Disk Management, we found that the previous 3TB hard drive was split into two separate hard drives, which can then be used by right-clicking the new disk partition, although the partition format is still MBR.

Discwizard software to virtual SCSI hard drive to run the extra capacity

Long before the advent of the 3TB hard drive, the expansion of the existing BIOS system caused some panic, but with the continuous maturity of the 3TB hard drive, in fact, the problem is easy to solve. In addition to the Seagate solution, many high-end motherboards provide software to crack 3TB hard disk capacity, such as Gigabyte 3tb+ Unlock, ASUS Disk unlocker software can achieve full capacity, so as the motherboard BIOS upgrades and more cracked software release, The capacity growth for the hard drive will no longer be limited.