Two routers for optimal placement point of the middle wall, the way through the WDS bridge signal is too weak and unstable. But a, b two routers between the cross cover, a weak b strong, b weak a strong. How to set the mobile phone, tablet and other mobile devices seamless switch? When walking freely, can let the handset connect the signal strong wireless router automatically, and can obtain the IP address automatically on two routers?
Failure method:
Set the same SSID, password, channel, resulting in two wireless routers conflicting, seamless switch failed.
Successful approach:
1. Access mode of equipment
Cat--No Line by a
LAN Port of Route A-LAN port of Router B
2. Router settings
(1) A route to the Internet dial-up, and then open the DHCP server to set up 192.168.1.X network segment, through network cable access B routed LAN port;
(2) Route B shuts down DHCP, setting the IP address of the LAN to 192.168.1.2;
(3) A, b two routers of the SSID, password encryption method set to the same;
(4) The channel number of two routers is a bit larger, such as a route using channel 6,b Route 11.
Which channel to choose?
Use the Wirelessmon to view the channel usage of the surrounding wireless networks first. Choose a channel with low frequency to use and avoid interference. The following figure shows that other bands except 1, 4, 6 and 11 have lower usage rates.