Many people use SECURECRT, want to automatically record the log, one is convenient for later review, one is to own operation has a record. You can see what you've done, and sometimes you can even see if you've made a mistake before, and it's a great feature.
The settings are simple and can be automatically divided according to the attached host, the following is the description:
Select "Options"-"global Options" in the menu
Then select General--default session--edit default settings edit default settings
Then select the log file
Fill in the log file name with the log path name you want to save and the log file name
Start log upon connect indicates that the record is started when connected, and Append to file means that the append is not overwritten.
Here in order to be able to log each session, you can use the supported parameters
%H Host name%s session name
%Y year%M Month%d Day
%h hours%m minutes%s seconds
For example, I filled out the E:\SecureCRT\Logs\%H\%Y-%M-%D_%h%m%s.log
is to remain in the E:\SecureCRT\Logs\ directory, the path can also use parameters
\%h\ This setting can put the same host log into a folder, the folder name is the hostname, does not automatically create a folder
Here you can check the log on the connection to start logging
Because we often open securecrt, but not always use, in order to know when I enter the command is at the time, you can in the "on every line" in this setting of the [%h:%m:%s]
This will record the time each line of log was entered.
Logs such as:
Give it a try!
SECURECRT Configuring automatic Logging