Server Remote control tool-ultra @ VNC

For LAN server management personnel, if any maintenance operations on the server must be performed on the site of the computer where the server is located, the maintenance efficiency of the server is certainly not very high, network administrators will also be exhausted! To effectively improve server maintenance efficiency, many people use the Remote Desktop Web connection function on Windows 2003 Server to connect to any other computers that can be connected to the Internet, remote Maintenance and Management of servers in various ways. However, remote control of servers using this method requires complicated settings. Obviously, this method is not suitable for cainiao-level network administrators, in addition to using the built-in Remote Desktop Web connection function of the server system to remotely control the server, is there a simpler and faster way to remotely control the LAN server? The answer is yes! This article recommends a way to remotely control servers as you like through professional remote control software ultra @ VNC!

Remote Control Preparation

To remotely control the LAN server, you must download the installation of strongultra@vncat http://ycsti.sti.js.cn/old/down/cultravnc.exe.ProgramAnd install it on the server. After the control program is installed, the ultra @ VNC Viewer icon and ultra @ VNC Server icon will automatically appear on the system desktop. The icon above is usually used on the client, the following icons are generally used for server settings.

After installing the remote control program, you also need to check whether the network parameters of the server are set correctly. For example, if a static IP address is assigned to the server, whether the server is currently connected to the entire LAN. If the server is not properly connected to the LAN, or the server has not yet obtained a static IP address, then you will not be able to remotely control the server in various forms.

Remote Control

After completing the preceding preparations, you can double-click the ultra @ VNC Server icon on the server and then you can see the remote control setting interface on the server, at the same time, in the system's taskbar tray area, you can also see the control icon of the control program, move the mouse over the icon, the program will automatically display the IP address used by the current server, later, when you access the server from the client, you need to connect through this IP address.

In the settings window, select the "Accept socket connection" option and enter the logon password to connect to the server remotely in the "password" text box. This ensures the security of remote control of the server;

Next, in the "display number or port" setting, specify the port number used for server connection. By default, the remote control software ultra @ VNC automatically assigns you a port number to log on to the server.

After setting the parameters for "inner connection", you can further set the related operations after logging on to the server. For example, you can specify how to operate the server after the remote control operation is completed in the "when the last client is disconnected" setting, if you do not want others to log on to the server at will, you can select the "Lock workstation" option. If you want to transfer files to the server, you can select the enable file transfer option in the miscellaneous settings. If you want to disable the keyboard and mouse on the server, you can select the "Disable remote keyboard and pointer" option in "connection setting value.

After completing the settings on the server side, install the client program of Ultra @ VNC on any workstation that can access the LAN. After the installation, double-click the ultra @ VNC Viewer icon on the desktop to view the logon connection window. In the "VNC Server" setting area of the window, enter the IP address of the server to be remotely controlled. Then, in the "quick options" setting area, select the "Lan" option; if you do not want to perform remote operations on the server, but want to remotely view the settings of the server, you can select the "only view" option here, then, click "Connect" and enter the password for logging on to the server to connect to the remote server. In this way, you can operate on the local server, perform Various operations on the remote server.

TIPS: You can remotely control the server on other clients only when the ultra @ VNC service is started on the server. However, if the computer on which the server is located suddenly restarts and the network administrator is not on the server, the ultra @ VNC service cannot be started in time, in this way, you cannot remotely manage the server. To avoid this problem, you can open text editing tools such as Notepad on the server side and enter the followingCode:

@ Echo off X: \ Winsock \ UltraVNC \ winvno.exe-install (where X is the installation partition of the ultra @ VNC disk, fresh drops ")

Then execute the "file"/"save" menu command in the notepad editing window, and save the above Code as a batch file such as "autoinstall. Bat;

Next, run the "Start"/"run" command in sequence. In the displayed system running dialog box, run the Group Policy Editing Command "gpedit. MSC. in the edit window that appears, expand the "Computer Configuration", "Windows Settings", and "script (start/Close)" branch in sequence, in the right subwindow of the corresponding "script (start/Close)" branch, double-click the "Start" option to open the "Start attribute setting" window;

Click the "add" button in the window. On the page that appears, click the "Browse" button. In the open file selection dialog box, set the "autoinstall. bat "is selected and imported into the batch file, and then click the" OK "button, so that the server system will automatically execute" autoinstall. bat "Batch Processing file to start the ultra @ VNC service.

Of course, if you do not want to remotely control the server in the future, you can also open the system running dialog box on the server side and execute "X: run the \ Winsock \ UltraVNC \ winvno.exe-Remove command to clean and uninstall the ultra @ VNC service installed on the server.