Signal Integrity Chapter II Summary

• The rise time of the signal is usually the 10%~90% time from the final value.

• The spectral amplitude of the ideal square wave decreases at the rate of

• If the higher frequency component of the square wave is removed, the rise time will increase

• The bandwidth of the signal is 0.35/(The rise time of the signal)

• As long as the signal bandwidth is reduced, the rise time increases

• Measurement bandwidth refers to the highest frequency component of a signal with good measurement accuracy

• The bandwidth of the model refers to the maximum sine frequency component when the predicted value of the model matches the measured value of the actual performance of the interconnect.

• The bandwidth of the interconnect is the maximum sine wave frequency at which the performance of the signal can still meet the indicator

Signal Integrity Chapter II Summary