Sony MT27i Android2.3.7 wire brush Android4.04

Author: KillerLegend

From: http://www.cnblogs.com/killerlegend/p/3733150.html

Date: 2014.5.16

Tool: Windows7 + FTF file (MT27i_6.1.1. B .1.10_Global, 401 MB, Android4.04) + FlashTool (flashtool-0.9.16.0-windows, 107 MB)

Please go to my Baidu Network Disk download: FTF file: http://pan.baidu.com/s/1ntAyo33 FlashTool: http://pan.baidu.com/s/1bnw53Fh

 

Finally, a Android4.04 system is obtained, which is not unlocked, not root, and is relatively simple to unlock and root. Here we only talk about wire farming.

Install FlashTool:

After the installation is complete, you need to install the driver and go to the installation root path of FlashTool, as shown in the following figure. Open drivers:

Select flashtool-drivers.exe to run

Click Next and select the driver to be installed. If you do not understand it, select all (it seems a bit more ^-^)

Click Install. The following page is displayed. click Next.

Enter the installation interface as follows:

The following prompt is displayed. Select the second option, for example:

After the driver is installed, click Finish.

After installing the driver, place the ftf file in the firmwares folder, for example:

Open flashtool. if the computer is 64-bit, open the flashtool64.exe program and follow the steps shown below:

Next, the following window is displayed. By default, the Source folder automatically selects the path. If you do not follow the default path, select the path as shown in the following figure in the Wipe and Misc columns, click the Flash button.

As shown in:

Tip: Preparing files for flashing

At this time, please be patient. The following page will pop up in a few minutes:

Follow the prompts on the page to unplug the device, shut down, and wait for more than 30 s. Note that you do not press the Enter key, but press the volume reduction key, and insert the data line at the same time. At this time, the indicator turns green, the interface disappears, and a progress bar appears. After a moment, you can release the volume key.

Wait for several times and the following page appears:

Tip:

15/005/2014 00:05:01-INFO-Flashing finished.

15/005/2014 00:05:01-INFO-Please unplug and start your phone

15/005/2014 00:05:01-INFO-For flashtool, Unknown Sources and Debugging must be checked in phone settings

15/005/2014 00:05:01-INFO-Device connected in flash mode

15/006/2014 00:06:17-INFO-Device disconnected

Indicates that the flash is complete.

Welcome to my Sina Weibo: Give me a home ^-^