Tenda router configuration method Q & A summary

When using a wireless router, Tenda router settings and other problems often occur, as well as initial password settings and frequent online disconnection. Here we will introduce the solutions to many problems involved in the Tenda router setting method.

Tenda router configuration method Q & A summary

◆ I have inserted all the cables into the router lights, and all the cables comply with ''as prompted''

◆ But it cannot be installed when the drive disk is installed''

◆ In addition, the local vro setting method is also restricted. The error message "cannot access the Internet" is displayed. My name is 192.168.0.1.

◆ Answers that do not need to be copied. I usually find simple answers on the Internet that can solve the problem '''

◆ Therefore, please give the actual answer '''thank you for going online'

◆ You should drop the IP address on the computer first,

◆ If you have 0.1, 192.168.0. ** 255.255.255.0. 192 168.0.1... gateway. 222.246.129.81 slave 51.59.78.211

◆ Then ping.192.168.0.1 or 192.168.1.1 is running.

◆ Check whether ping is enabled first.

◆ The network cable may be disconnected. Or Nic settings.

◆ Tenda vro setting method: Enter the route directly.

◆ On IE. Enter 192.168.1.1 or. 0.1

◆ If you are in China Telecom, it is generally. 1. The routing configuration instructions include''

◆ I changed the IP address according to what you said. The PING is successful, but still cannot enter 192.168.1.1 or 192.168.0.1.

◆ Two IP addresses cannot be connected to ''' or cannot be opened ''. How can this problem be solved?

◆ No driver disk needs to be installed. You can set all your IP addresses to be automatically obtained,

◆ Then open IE and enter 192.168.1.1 or 192.168.0.1 user password and enter admin

◆ After entering the page, set your Internet access method. If it is a telecom dialing method, PPPOE is selected,

◆ Enter your internet account password, save it, and confirm that your account and password are correct. Then you can access the Internet,

◆ I am using the Tenda router setting method) if there is a drive disk, even if the driver is not needed, I cannot open the IP address. My IP address is 192.168.0.1, which does not go to the route settings. ''You can just go in. The problem is that this cannot be done'