Tenda wireless router configuration and installation tutorial

Install tenda wireless router settings

I. SetVroConnect any LAN port to the interface of the Computer NIC with a network cable.

2. Local Computer Connection Properties> Internet Protocol (TCP/IP): IP Address: 192.168.1.2.

3. IP subnet mask: Select 255.255.255.0.

4. Gateway: select the IP address 192.168.1.1 of the vro.

5. Use IE, http: // 192.168.1.1. If the default IP address of the vro is 192.168.1.1, you are prompted to enter the user name and password, enter the default user name and password for the vro according to the random attached manual.

6. The default IP address of the router varies from manufacturer to manufacturer. Please refer to the accompanying description.

Steps for setting a tenda wireless router:

(1) LAN port settings: A. IP Address: Select default. factory default settings: 192.168.1.1. BIP subnet mask: select the default, and use 255.255.255.0 as the subnet mask.

(2) WAN interface connection type: A. Select "PPPoE ". B. Enter the ADSL account and C. Enter the password of the ADSL account.

(3) Select "Automatic Connection ".

(4) Size of the data packet MTU (maximum transmission unit): The default value is 1480 bytes.

"Use the IP address specified by the ISP" is not selected for the region ".

"Manually set DNS server" is not selected for "manually set DNS server ".

Renew the DHCP server and select "enable ".

⑻ Address pool start address: select the default address. The default address is 192.168.1.100.

⑼ Address pool end address: select the default address. The default address is 192.168.1.199.

Renewal address lease period: the default value is 120.

Choose not to enable DMZ host ".

⑿ UPnP: Select "close ".

Firewall Enable Firewall: do not select it first. If any problem occurs during use, select it again.

Save settings.

Computer settings for tenda wireless router settings

1. right-click "Local Connection" → properties → General → use the following items for this connection], select "Internet Protocol" → properties → select "automatically get IP Address" → select "automatically get DNS Server address ".

2. Connect the network cable from the ADSLModem to the WAN port of the router.

The tenda wireless router is basically over. However, it is unrealistic to pull the network cable because of the actual situation to remind the user of the computer connected to the wireless network. In addition, this computer supports Internet access, if you want to use a dynamic domain name, how to implement it, how to automatically obtain the Intranet IP address, and how to use a dynamic domain name for Internet access.