Tenda wireless router settings

This article describes in detail how to set the tenda wireless router. This article provides detailed operation instructions and settings. I believe this article will help you.

Prepare the TENDA W54R wireless router:

1. Connect Any LAN port of the router to the interface of the Computer NIC with a network cable.

2. Local Computer Connection Properties> Internet protocol TCP/IP): IP Address: 192.168.1.2.

3. IP subnet mask: Select 255.255.255.0.

4. Gateway: select the IP address 192.168.1.1 of the vro.

5. Use IE, http: // 192.168.1.1. If the default IP address of the vro is 192.168.1.1, you are prompted to enter the user name and password, enter the default user name and password for the vro according to the random attached manual.

6. The default IP address of the router varies from manufacturer to manufacturer. Please refer to the accompanying description.

The main steps to correctly set the TENDA W54R Wireless Broadband Router are as follows:

(1) LAN port settings: A. IP Address: Select default. factory default settings: 192.168.1.1.

(1) B IP subnet mask: select the default value, and use 255.255.255.0 as the subnet mask.

(2) WAN interface connection type: A. Select "PPPoE ".

(2) B. Enter the ADSL account,

(2) C enter the password of the ADSL account.

(3) Select "Automatic Connection ".

(4) Maximum Transmission unit of data packet MTU) Size: Default Value: 1480 bytes.

"Use the IP address specified by the ISP" is not selected for the region ".

"Manually set DNS server" is not selected for "manually set DNS server ".

Renew the DHCP server and select "enable ".

⑻ Address pool start address: select the default address. The default address is 192.168.1.100.

⑼ Address pool end address: select the default address. The default address is 192.168.1.199.

Renewal address lease period: the default value is 120.

Choose not to enable DMZ host ".

⑿ UPnP: Select "close ".

Firewall Enable Firewall: do not select it first. If any problem occurs during use, select it again.

Save settings.

Computer settings:

※Right-click "Local Connection" → properties → General → use the following items for this connection. Select "Internet Protocol" → properties → select "automatically retrieve IP Address" → select "automatically retrieve DNS "server address ".

※The network cable from the ADSL Modem should be connected to the WAN port of the router.

It is unrealistic to pull the network cable for a computer connected to the wireless router due to the actual situation. In addition, this computer that supports Internet access wants to use dynamic domain names and how to implement it to automatically obtain the Intranet IP address, how to use dynamic domain names for Internet access