tl-wr847n How to set up the 300M wireless router

PU tl-wr847n 300M wireless Router setup Step one: tl-wr847n router installation

The newly purchased Tp-link tl-wr847n 300M Wireless router, from the device connection to the completion of the Internet configuration, requires the following 3 configuration procedures: 1, tl-wr847n router installation, 2, set up computer ip;3, set up tl-wr847n router.

1, telephone line users: Please prepare 2 short network cable, a network cable used to connect ADSL modem or light cat on the network cable interface and Tp-link tl-wr847n router on the WAN interface; another network cable, one connection to the computer, the other end of the connection Tp-link 1/2/3 any interface on the tl-wr847n router.

2, Optical brazing users: users need to prepare 2 network cable, one of the network cable used to connect the light cat and Tp-link tl-wr847n Router WAN interface, another network cable to connect the computer and Tp-link tl-wr847n Router LAN interface (1/2/3/ Any one of the 4 is OK).

3. NET Network: Please prepare 1 short network cable, network cable households: refers to the broadband operators to provide a network cable to the user's home; Please first plug the network cable provided by the broadband operator into the WAN interface on the Tp-link tl-wr847n router, and then connect the prepared network cable to the computer, The other end connects the 1/2/3 arbitrary interface on the Tp-link tl-wr847n router.

Note The problem: The LAN status indicator for the LAN port on the router panel and the network card LEDs on the computer must be lit.

Puling tl-wr847n 300M Wireless Router setup Step two: Set Up computer IP

When connecting the tl-wr847n router to the Internet, you need to configure the IP address of the computer to be a dynamic IP address (automatically acquired); Because the router has DHCP service enabled, you can assign computers the IP, gateway, subnet mask, DNS, and other addresses needed to access the Internet.

Puling tl-wr847n 300M Wireless Router setup step three: Set up the tl-wr847n router

1, Login Management interface: Open a computer on any browser, in the browser's address bar input: 192.168.1.1 and press ENTER (enter)--> in the pop-up dialog box enter the default username: admin; default login password:admin--> click " Ok. "

2, Run the Setup wizard: the initial configuration of the tl-wr847n router, the system will automatically run the Setup Wizard, if it does not eject the page, you can click on the left side of the Page Settings Wizard menu to activate it.

3, choose the way of Surfing the Internet: select "PPPoE (ADSL virtual dialing)"--> "Next".

4, configure the Internet account: Please according to the ISP broadband operators to provide broadband username and password, fill in the "Internet account", "Internet password"--> "Next".

5, wireless network settings: "Wireless Status" selection: Open--> Set "SSID", the SSID is the name of the wireless network, note that the SSID can not use the Chinese--> select "Wpa-psk/wpa2-psk"--> settings "PSK password"--> " Next. " PS: "Channel", "mode", "band bandwidth" and other parameters remain the default, no configuration.

6, click "Reboot"

After the tl-wr847n router restart is completed, just the configuration will take effect, when the computer connected to the tl-wr847n router can be directly on the Internet, the computer does not need to make a broadband dial-up connection; So far, the installation of the tl-wr847n router and Internet settings have been completed.