tp-link tl-wdr4320 Wireless Router setup diagram Step one: tl-wdr4320 router installation
1, telephone line Internet: need to prepare 2 short network cable, a network cable used to connect the tl-wdr4320 router Wan interface and ADSL Modem (CAT); Another network cable is used to connect any LAN on the tl-wdr4320 router (1/2/3/4) interface with the computer used to set up.
2, Optical brazing: Please prepare 2 network cable, a network cable used to connect the tl-wdr4320 router WAN interface and light cat; another network cable is used to connect any LAN (1/2/3/4) interface on the tl-wdr4320 router to the network cable interface on the computer.
3, network cable households: Please prepare 1 network cable, first the broadband operator provided by the household network cable inserted in the TL-WDR4320 wireless router WAN interface; and then put the network of their own cable, a connection to the computer, the other end connected to the tl-wdr4320 router on any one LAN (1/2/3/4) Interface.
Tp-link tl-wdr4320 Wireless Router Setup diagram Step two: Set Up computer IP
1, with the mouse right click on the desktop "Network Neighborhood"--> Click "Properties."
2, the mouse right click "Local Connection"-> Click "Properties"
3, the mouse double click Internet Protocol (TCP/IP)
3, select "Automatically obtain IP address" and "Automatically obtain DNS server address"--> click "OK".
Tp-link tl-wdr4320 Wireless Router Setup diagram Step three: Router setup Internet
1, input settings address: Run the Computer browser, in the browser's address bar input: 192.168.1.1 and press the Enter button.
2, Login Settings interface: Enter the default login User: admin; The default login password:admin--> click OK.
3, Run the Setup wizard: Click the "Setup Wizard"--> click "Next".
4, choose the way of Surfing the Internet: select "PPPoE (ADSL virtual dial)"--> click "Next".
5, set the Internet parameters: in the "Internet account" after the broadband operators to fill out the broadband user name--> in the "Internet password" and "Confirm password" to fill in the broadband operators provide broadband password--> click "Next".
6, set up wireless working frequency band: Select "Wireless simultaneously work in 2.4GHz and 5GHz band (802.11A/B/G/N/AC)"--> click "Next".
7, 2.4GHz Wireless settings: Set "SSID", the SSID is the name of wireless WiFi, with the combination of letters and numbers, do not use Chinese characters and special characters--> select "Wpa-psk/wpa2-psk"--> set "PSK password", The PSK password is the wireless wifi password--> click "Next".
8, 5GHz Wireless settings: Set "SSID", the SSID is the name of wireless WiFi, with the combination of letters and numbers, do not use Chinese characters and special characters--> select "Wpa-psk/wpa2-psk"--> set "PSK password", The PSK password is the wireless wifi password--> click "Next".
9, restart the router: click "Reboot"--> in the pop-up dialog box click "OK".
Tp-link tl-wdr4320 Wireless Router Setup diagram Step four: Check that the settings are successful
After reboot, re-enter the router management interface--> Click "Run Status"--> view "WAN status", if the "WAN status" under the IP address information, the setting is successful, you can share the Internet, as shown in the following figure:
If the 0.0.0.0 appears under WAN status, check the related setup steps carefully.