Tp-link wr700n repeater How to set

Tp-link wr700n Repeater Setup Method

1, open the computer desktop of IE browser, empty the address bar and enter 192.168.1.253 (admin address), return to the page will be pop-up login box. (ps:192.168.1.253 can not open?) Click to read: 192.168.1.253 not open solution

Enter 192.168.1.253 in Browser

2, in the Login password box, enter the router default management password: admin, click Login, enter the management interface.

Enter the default login password for tl-wr700n

Step five: tl-wr700n repeater mode settings

1, Run the Setup wizard: Enter the router's management interface, click the "Setup Wizard"--> click "Next".

Setup Wizard for tl-wr700n Mini router

2, select the mode of work: Here you need to select "Repeater: Relay Mode"--> click "Next".

Select "Repeater: Relay Mode" on the tl-wr700n router

3, Scan signal: Click "Scan".

Scans for wireless signals that need to be relayed

4, in the scan results, find the main router's wireless signal name (SSID)--> click "Connect."

The tl-wr700n router is connected to a wireless signal that needs to be relayed

Note: If the corresponding signal is not scanned, verify that the primary router is switched on and try to reduce the distance between the routers.

5, enter the wireless key: "Key Type" Please select the same type as the main router--> "key" Please enter the main router's wireless network password--> Click "Next".

Enter the relayed wireless signal password

6, restart the router: click "Reboot"--> will pop up the restart Prompt dialog box, click "OK" again.

tl-wr700n Router Setup completes reboot