Tp-link routers how to set up a wired way bridge

Tp-link Router wired way bridging setup graphics and text tutorial

Method One, router B set up dynamic IP Internet

1, using a network cable to connect the computer and Tp-link router B LAN (1, 2, 3, 4) any one; A, b between routers, temporarily do not need to use network cable connection.

Connect your computer to the wireless router only

2, into the B router settings interface, click the "Network Parameters"--> "WAN port Settings"--> "WAN Connection Type" selection: Dynamic ip--> click "Save."

Tp-link Router B set up dynamic IP Internet

3, click the "Network Parameters"--> "LAN port Settings"--> the right "IP address" modified to:192.168.2.1--> click "Save", will be prompted to restart the router.

Modify Tp-link Router B's LAN port IP to 192.168.2.1

Warm tip: B Router Restart, users need to use 192.168 2.1来 login B Router Settings interface, that is, the router LAN interface IP address, is the wireless router settings URL.

4. To prepare a network cable, a connection to a 1, 2, 3, 4 of any of the interface, the network cable to the other end of the WAN interface connected to B.

Router A's LAN port connection B's WAN port

After the completion of the appeal settings, as long as a router can access the Internet, then the B router is also available to the Internet, the computer connected to the B Router 1, 2, 3, 4 interface can access the Internet, mobile phones, notebooks and other wireless terminals, connected to B wireless network, can also be online.

Method B as a wireless switch

1, using a network cable to connect the computer and Tp-link router B LAN (1, 2, 3, 4) any one; A, b between routers, temporarily do not need to use network cable connection.

Connect your computer to the wireless router only

2, modify the B router LAN port IP address: Click the "Network Parameters"--> "LAN Port Settings"--> "IP Address" modified to: 192.168.1.X (2 Click "Save", will be prompted to restart.

Modify Tp-link Router B's LAN port IP address as 192.168.1.200

Warm tip: B Router Restart, users need to use 192.168 1.200来 login B Router Settings interface, that is, the router LAN interface IP address, is the wireless router settings URL.

3, the preparation of a network cable, a router to connect a LAN (1/2/3/4) interface, the other end of the LAN (1/2/3/4) connection B Router Free interface, note that you must not connect to the B router WAN interface.

4. Shut down the DHCP server on the B router: click "DHCP Server"--> "DHCP service"--> "DHCP server" select: Do not enable--> click "Save".

Turn off the DHCP server for Tp-link router b

After 4 steps to complete the appeal, the B router will be able to access the Internet, if you want to use wireless WiFi on the B router, just set the wireless WiFi name and password on the B router, no more settings.

Method Two summary: 1, modify b router LAN port IP and a router LAN port IP on the same network segment, 2, b router shutdown DHCP server, 3, a router LAN interface connection b router LAN interface.