A lot of people do not know the method of router reset, today I take the tp-link of several products as an example of the specific operation of the wireless router reset procedures, and various classes of Tp-ink gave different methods, such as: tl-r4xx Reset, wireless AP reset.
First, ADSL category
(1) td-8830/td-8831 Reset Method
In the case of constant electricity, hold down the reset key for about 10 seconds, then release, reset success. Default Admin Address: 192.168.1.1, default username password: admin/admin;
(2) TD-8800 Reset Method
In the case of continuous electricity, press reset key three times, all flashing lights, reset success. Default Admin Address: 192.168.1.1, default username password: admin/admin;
(3) td-8810/td-8610 Reset Method
Power off first, then hold down the Reset key, then turn on the power, wait about 3 seconds, reset successfully. Default Admin Address: 192.168.1.1, default username password: admin/admin.
Second, switch class
(1) tl-sf3226p,tl-sf3008, tl-sf3117p and partial web-managed switch Reset methods
Connect the switch through the serial port, use the Super terminal to login The switch, have a prompt interface before starting the switch, press ctrl-b key to enter BootMenu, see "Please Input bootrom password:" After direct return, then in the appearance of the interface select " 3:restore factory default setting ", restore the switch to factory settings, and finally select" 5:reboot "can be. The default admin address is 192.168.0.1, and the default username and password are supervisor/supervisor;
(2) tl-sf2108p, tl-sf2109p, tl-sf2808p, tl-sf2216p, tl-sf2224p, tl-sf2232p, tl-sl2226p, tl-sf2008, TL-SF2117P, TL-SF1016V, tl-sf1024v, tl-sg2008 Reset method
This series of switches are managed using the Tp-link SSC program and can be logged in without using a username and password;
(3) tl-sf2226p+/tl-sl2226p+ Reset Method
Using the Tp-link SSU management program, click "Device"-> "Restore factory settings", the switch will revert to factory defaults. The default admin address is 192.168.0.100, and the default username and password are admin/admin;
(4) Switch with reset key: Tl-sl2210web, Tl-sl2218web, Tl-sl2428web, Tl-sl2452web, Tl-sg2109web, Tl-sg2216web, Tl-sg2224web. These switches reset method and the same as the reset method of the router: first power off, hold down the reset key do not let go, power at the same time, see all lights flashing that is reset success. The default administrative address is 192.168.0.1, and the default username and password are supervisor/supervisor.
Third, broadband router class
(1) The method of resetting the router without M1 and M2 lamp
tl-r400+ Reset Method
Turn off the power, hold down the reset button, and then turn the power on, releasing the button for about 5 seconds, and the router will revert to the factory default value. Default Admin Address: 192.168.123.254, default username password: admin/admin;
tl-r420 Reset Method
When the reset key is pressed for about 2 seconds, the router will revert to the factory default value. Default Admin Address: 192.168.1.1, default username password: admin/admin;
tl-r400 Reset Method
When the reset key is pressed for about 2 seconds, the router will revert to the factory default value. Default Admin Address: 192.168.123.254, default username password: admin/admin.
(2) Reset method of tl-r4xx router with M1 and M2 lamps
There is a small hole in the front/back panel of the router, next to the word: reset; Turn off the power of the router, find as sharp as the tip class hold the Reset key;
Add electricity to the router, wait for about 3-10 seconds, to M1 and M2 lights at the same time flashing three times can let go, reset success; Note that after the reset the router will return to the factory settings, the default login IP is 192.168.1.1; The default username and password is admin/admin. When landing, please note that your computer's IP address is not in the 192.168.1.0 network segment.
Fourth, wireless category
(1) The Reset method of wireless AP
tl-wa200/tl-wa200+ Reset Method
Power-on state hold down the reset button for 5-10 seconds, when the WLAN led from off to slowly shiny, indicating the success of the Reset, 3.0 version of the IP address is 192.168.1.100, the default username password admin/admin, and the 3.1 version of the IP address is 192.168.1.1, the default username password admin/admin.
tl-wa501g Reset Method
Turn off the power first, then hold down the Reset key, then turn on the power, after 3 seconds, the system lights first out, the AP will revert to the factory defaults. Default Admin Address: 192.168.1.1, default username password: admin/admin;
(2) The Reset method of the wireless router
WR245 version 1.0 Reset method
In the power state, press and hold the reset key for more than 5 seconds, the router will revert to the factory default value. Default Admin Address: 192.168.1.1, Default user password admin/admin;
WR245 2.0 Reset method
Turn off the power, hold down this button, and then turn on the power for about 3 seconds before the system LEDs go off and the router reverts to the factory defaults. Default Admin Address: 192.168.1.1, default username password: admin/admin.
Tl-wr3xx/tl-wr5xx/tl-wr6xx Reset Method
Turn off the power first, then hold down the Reset key, then turn on the power, wait until the system light flash three times after releasing the reset button, the router will revert to the factory defaults. Default Admin Address: 192.168.1.1, default username password: admin/admin;
TL-WR240+/WR240 2.0 Reset method
Hold down the reset button for about 10 seconds after the power is added, and the router will revert to the factory default value. Default Admin Address: 192.168.1.1, default username password: admin/admin;
We have introduced the router reset from the switch class, the broadband router class, the wireless class, the ADSL class, and introduced the operation step in detail.