Tp-link wr720n Wireless AP mode how to set

Tp-link wr720n wireless AP Mode Setup Tutorial

Step 1: Connect to tl-wr720n. Because tl-wr720n in AP mode by default does not open the DHCP server, can not automatically assign IP address to the computer, so need to configure the computer wireless network connection IP address, in order to log on the router's management interface. Set the computer wireless network connection IP address to 192.168.1.X (2≤x≤252), and the subnet mask is set to: 255.255.255.0, as shown in the following figure. When the settings are complete, click "OK" to take effect. tl-wr720n The default management IP address "192.168.1.253".

Step 2:tl-wr720n Wireless Security is not set by default. Computers can connect to tl-wr720n via wired or wireless (as an example of XP system wireless connection to tl-wr720n), scan the wireless network in the environment, select the tl-wr720n wireless SSID, and click "Connect", as shown in the following image.

Step 3: Enter "192.168.1.253" in the browser, enter the login username and password are admin, open the tl-wr720n management interface, automatically pop-up "Setup Wizard" (can also click the Admin Interface Menu "Setup Wizard"), as shown in the following figure.

Step 4: Select the operating mode of the AP as needed, this example selects "Access point mode", and other modes refer to the 700N setup mode, as shown in the following illustration.

Step 5: Click "Next" to eject the wireless Settings page as shown in the following figure.

In the page shown above, you can set the SSID of the tl-wr720n (that is, the wireless network name). To prevent illegal users from rubbing the net, it is recommended to set wireless security, the recommended choice "wpa/wpa2-Personal Edition" and set the password (this example is ABCDEFGH).

Step 7: Click "Next" to indicate that the device needs to be restarted, as shown in the following figure.

Click "Reboot", the router automatically restarts, Setup is complete.

Step 8: Reboot completes, at this time tl-wr720n wireless network has set wireless security, the computer's wireless network connection will automatically disconnect, need to reconnect tl-wr720n wireless network (in this case the SSID is tp-link_531984), You need to enter a tl-wr720n wireless PSK password (in this case, ABCDEFGH) during the connection process, as shown in the following image.

Step 9: After the configuration is complete, please reset the wireless network connection IP address to the original configuration (usually automatically obtain the IP address), click "OK" to be effective to connect to the Internet normally, as shown in the following figure.

Note: tl-wr720n Default management IP Address "192.168.1.253", you must set the LAN port tl-wr720n IP address to the wired LAN and all devices are not the same IP address, to prevent the occurrence of IP address conflicts (generally do not need to modify )。 Can be in the menu "Network Parameters"-"LAN port Settings", modify IP, click "Save", the router automatically restart. As shown in the following figure.

Now that the tl-wr720n AP mode is configured, the computer is searching to tl-wr720n the wireless SSID is TP-LINK_531984,PSK key is abcdefgh.