Traffic Control in Alpha router settings

Traffic control set by the Alpha router. The Alpha router not only has a stylish appearance, but also has a powerful network management function. Today we will mainly introduce it to you.
Alicloud router's most practical LAN traffic control function effectively solves network congestion or some people use P2P software on the Intranet to occupy a large amount of bandwidth,
Nic problems. The traffic control settings of the Alpha router are extremely simple. After logging on to the router, click the IP traffic control option in the left-side navigation bar,
On the right side of the page, enter the IP address segment to be controlled, set the upstream and downstream bandwidth limits, and click Save.
Button. Www.2cto.com

1. Select the Intranet IP segment or single IP address to be restricted from the starting IP address and ending IP address. If only one IP address is restricted, enter the same IP address. For example, enter the starting IP Address
192.168.1.2. If the IP address to be terminated is 192.168.1.2, the rule controls the IP address 192.168.1.2.
If the bandwidth limit is for all IP addresses in the Intranet, enter 192.168.1.0 to 0. This means that all IP addresses are subject to this rule. 2. uplink bandwidth refers to the upload bandwidth of the Intranet IP address. downlink bandwidth refers to the download bandwidth of the Intranet IP address. The speed here is kbit/s, and the general file
Download speed: KB/s, 1 KB = 8 KB. 3. Minimum bandwidth. If you use 10 m optical fiber to access the Internet at the moment, set the downstream bandwidth to 8000 kbit/s for the Internet bandwidth, and use all the resources of the current row.
When the traffic does not reach kb/s, a single IP Address can break through the downstream traffic control value of a single IP address, but the entire downstream traffic
The total number does not exceed kb/s. When the total downstream traffic of the router reaches kb/s
When some of the Intranet IP addresses cannot reach the downstream Traffic Value of a single IP address you set, the IP rate with a higher speed will decrease,
This ensures that all IP addresses in the Intranet can meet the minimum bandwidth requirements. 4. The maximum bandwidth of www.2cto.com is the maximum available bandwidth of this rule, that is, the maximum bandwidth will not exceed this value. 5. When you select minimum bandwidth for start queue management, start queue management to reduce system performance. If you need to use minimum bandwidth, start queue management,
Set the bandwidth of the wa n port accurately, configure the upstream and downstream values of the minimum bandwidth, and then restart the device to apply the maximum speed of each computer. 6. List the IP speed in use. After clicking the speed, you can view the upstream and downstream traffic of the current Intranet IP address. You can sort the traffic by IP address and the rate depends to effectively view the network condition. The above is the traffic control settings of the Alpha router. After setting the parameters, you can control the Intranet Internet traffic,
For more information, see. This article is from