Ubuntu knowledge: FlashFXP and Virtual Machine VMware file transmission

After installing the system, the first step is to update the source and find the fastest source. The second step is to obtain the latest software information, which has little to do with this question. In fact, there are many methods to implement file transmission between Windows and Ubuntu, such as using FTP, SAMBA, or directly mounting a USB flash disk. The following describes a file transfer method through the FTP service. First install the FTP service. 1. Configure the FTP service 1. Install vsftpd software sudoapt-get

After installing the system, the first step is to update the source and find the fastest source.

The second step is to obtain the latest software information, which has nothing to do with this question.

Go to the topic.

In fact, there are many methods to implement file transmission between Windows and Ubuntu, such as using FTP, SAMBA, or directly mounting a USB flash disk.

The following describes a file transfer method through the FTP service. First install the FTP service.

1. Configure the FTP service

1. Install vsftpd Software

Sudo apt-get install vsftpd

Enter the preceding command to automatically download and install the FTP service.

2. modify the configuration file vsftpd. conf.

Sudo gedit/etc/vsftpd. conf

Enter the above command to open the vsftpd. conf file and make the following changes:

# Local_enable = YES

# Write_enable = YES

Remove the # number before the preceding two rows.

1. Users are allowed to upload files 2. Local Users are allowed to log on

Save the modification and exit. Run the restart command.

Sudo/etc/init. d/vsftpd start

The FTP service will be automatically started when the system is started later. After the above FTP configuration is complete, open the FlashFXP software on Windows.

I want to explain it in the form of images. The computer does not give face, the image function is not good, and it cannot be uploaded.

However, simply open the software and click:

Session> quick connection

In the displayed dialog box, enter the IP address of the virtual linux instance in the server or URL field, enter the user name and password, and click "Connect" at www.linuxidc.com. Then, you can drag files to each other.

Note: The network connection mode is NAT.