USB disk to install WinXP and Win7 dual system steps

1, download and install a U-Warrior to start the Production tool, click the desktop icon;

2, insert a U disk after clicking a key to make a USB boot Disk button, the program will prompt whether to continue to confirm that the selected U disk has no important data to start production:

3, Pop-up dialog box, click OK (Note the operation before backing up the good U disk useful information).

4, the production process do not carry out other operations to avoid the production failure, the production process may appear a short time pause, please wait a few seconds, when prompted to complete the safe removal of your U disk and plug the U disk can be completed to start the production of U disk. So that we can make a success.

5, we copy these two gho system to our U disk (Do u kai), you can go to reload the system.

6, restart the computer, the desktop we press del button, if it is a notebook general (press F1 or F2 or F11), and so on, here we press the F2 into the BIOS interface;

7, with the keyboard around the next key to choose the boot, the keyboard keys selected USB-FDD, and then press F6 the other to the first position, the same usb-hdd to the second place;

8, select Exit, and then press exit saving changes (or press F10 Select OK, the effect is the same).

9, in a short while start U kai; then we choose to run U warrior Win7 pe Lite version (super high compatibility).

10, after a while, we enter the PE system;

11, first of all, we double-click the Desktop Partition tool Diskgenius;

12, put you to install on that disk, format this disk, (if you have XP system, then you directly format the disk you want to install the Win7 system (in the format D disk), like I wrote a previous experience to reload win 8 system (with U disk reload win 8 system), just to see that experience is also possible); I am here two disk are formatted, from scratch directly installed;

13, click on the above, and then right click on the format, format is generally NTFS, click Format;

14, close the partition tool Diskgenius, then click on the Desktop manual ghost;

15, the appearance of the interface: Click OK, into the ghost.

16, now only the introduction of the installation system steps:

Click on: Local-partition-from Image (1-2-3 steps in Legend)

17, jumped out of the window as follows:

In the Drop-down browse list, select the location of your Gho file. It is best to put the Gho file in the root directory, so easy to find, Ghost Software folder named Chinese, will appear garbled, but you can not understand. (Here you first go to the computer where to see your USB drive disk is D or e disk, etc., so that you know your U disk)

18, choose good after Gho system, click Open (if you have XP system in use before, then you directly install the win7 system to your D disk on it);

19, there is no good choice, directly click OK.

20, now appear in the window you choose to install the disk (see size generally large data is hard disk, small is a U disk), select the hard disk, and then click OK.

21, after the appearance of the following window, identify your system to be installed in which disk, to identify your letter from the size of the disk data, the first one, is the C disk (if your previous XP system, then you only install Win7 on your D disk) selected, click OK.

22, the following figure indicates whether you really want to reload the partition, want to reload, click Yes, do not want to reload click No.

23, wait for a pop-up dialog box, I choose to restart the computer (reset computer), wait until the screen black U pull out, and then go to the BIOS, the hard drive into the first boot, then save and exit, and then, then the system will automatically install; and so installed, to the XP system, We've installed the XP driver and we're going to start installing our second system.

24, restart the system, according to the experience of the sixth step to the 22nd step to do again. Here, I'm going to say those places to pay attention, 12th, the 13th step format D disk, this disk is used to reload the Win7 system, the 18th step should be careful to choose the Win7 you want to install OH; you put the above steps are finished, do not restart the computer; When the progress bar runs to 100%, we choose the Continue OH , we also have to activate the Win7 launch page, and then we'll start;

25, here we fix the starting item, click Start, Program, in the Click System Maintenance, click system boot boot repair;

26, pop-up screen, click on Automatic repair, and then repair.

27, repaired well, click Exit;

28, choose to restart the computer, wait until the screen black U pull out, and then go to the BIOS, the hard drive into the first boot, then save and exit (the seventh eighth step above), and then appear below this screen, we choose Win7 system;

29, Next, will automatically install, install good win7, we can enter the Win7 system, then we will install a good drive on OK; If the 28th step of the splash screen is gone, we go back to perform 25 to 27 steps on the line; dual system can be done, in fact, this method can be installed in three systems we can install a WIN8 system.