USB Flash boot disk Creation

Step 1: Install ultraiso v9.3.0.2612 and insert a USB flash drive or memory card

Step 2: Use ultraiso to open the windows 98 boot disk (enhanced Edition). img

Step 3: Click the boot disc button,
→ Write to hard disk image
→ Format (use fat or FAT32, and use FAT32 to format the USB flash drive or memory card)
→ Click write (if you want to write a USB flash drive or memory card smaller than 256 MB, you can select ZIP or HDD mode. If the USB flash drive is larger than MB, You must select HDD mode for writing .)

Step 4: After the write is complete, delete unnecessary files. Only the basic DoS Files Io. sys, msdos. sys, and command.com are retained,
If you want to retain some tools of the green software alliance, you can also, for example, I only keep the partition software f32.com (which can be divided into GB hard disks, and the system CD can be directly read and installed ). This step is very important, otherwise it cannot be started, because the IO. SYS file is 219 KB, which contains the complete Windows98 system driver.ProgramAnd the IO of the "U disk boot system. the sys file cannot be used. The system prompts "start booting from, USB device ....., the screen will not move until now.

Step 5: Copy all the files in the USB folder of "U disk boot system" to the root directory of the U disk, and ask whether to replace the three files in the U disk.
Select No for all basic dos components.

Step 6: Now you have completed the "U disk boot system" production process. You can start it and try again. If the USB flash disk is large, you can change the image file of the ISO disc to CDROM. ISO.
And copy it to the root directory of the USB flash drive. In this way, you can use [4] to start the ISO image function. Success!

Windows 98 (( enhanced version. rar)
Http://www.ouyaoxiazai.com/article/UploadFile/2008-9/20089291041593594.rar