USB flash drive, mobile hard drive boot boot install linux system "Centos 6.4"

USB flash drive, mobile hard drive boot boot install linux system "Centos 6.4"

USB flash drive, mobile hard drive boot to install Linux system "Centos 6.4" (Rhel basically the same)

The case is that I installed 32 system, 64-bit when the USB drive single file greater than 4G can not FAT32 format problem is not available, the condition must be studied under the complement, is now a classic machine.

6.0, 6.3live CD have been tested just storage location is different. Need tool UltraISO soft Disk pass, Livecd.iso,centos-6.x.iso (own system version to install)

1. Prepare 1 USB drives or a removable hard drive. (capacity size at your own discretion)

2. Download UltraISO(primarily used to write ISO image files to a USB flash drive or to a removable hard drive)

3. Download Centos-6.3-i386-livecd.iso or X86_64.iso These two are used to boot the system installation disk, where _ 64 refers to a 64-bit system) (CENTOS-6.3-I386-LIVECD I use this with CENTOS-6.0-I386-LIVECD)

4. Download Linux system or other Cnetos-6 system 32-bit or 64-bit (I use Centos-6.4 at this time the latest version, decided to choose)

5. Open Centos-6.3-i386-livecd.iso with UltraISO or Centos-6.0-i386-livecd.iso,① click "Start"--"② write to Hard disk image--③ Select hard drive, be sure to choose the USB stick or removable hard drive , remember, remember otherwise self-destruct native system haha • ", ④ write Way USB-HDD (can choose other, zip compatibility is better), ⑤ Click Write Finish OK, so that the USB flash drive becomes the start U disk. (Will not use UltraISO this software Baidu, Google, not introduced here,)

6. Extract the Centos-6.4 inside /isolinux vmlinuz,initrd.img to the corresponding directory of the USB flash drive or the removable hard disk, if not please create. ( Note that the individual versions of LiveCD are stored in the root directory, not the same directory, remember, remember.) Online many say can not start with errors and so most of the problem is that the root directory is the flash drive, the directory that the mobile hard disk open when it is)

7. Extract Centos-6.4 inside /images install.img to u disk /images directory (no this folder please create, another version of Linux / Images under the efidisk.img is best also extracted using. Centos-6.4 is not in this file).

8. Copy the Centos-6.4.iso to the USB stick root directory. (I installed the Centos6.4 is two iso.centos-6.4-i386dvd1 3.51g,dvd2 size is 1.06G)

9. Set the BIOS to boot for USB flash drive or removable hard drive, and install CentOS 6.4 smoothly.

Installed successfully with 6.0 and 6.3live CDs.

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/26/95/wKioL1NsO7TR90HrAADAGKRC_8c986.jpg "title=" 11111111111111111112.jpg "alt=" Wkiol1nso7tr90hraadagkrc_8c986.jpg "/>

U disk diagram, the name of the CD-ROM can be changed casually, you can distinguish it.

---------------------------------------------Cute Split-line-----------------------------------------------------

another: Interface Description:

Verify and Boot & boot : Verify and Start & Start
Boot (Text Mode ): Text start
Boot (Basic Video ): Basic Desktop Startup
Install: Graphical installation
Install (Text Mode ): Text Installation
Memory test: Testing RAM
bootfrom local drive: Local Disk boot

Select "Install" To install the CentOS graphics.

Local CD/DVD: Select optical Drive
hard drive: HDD
NFS Directory: NFS
URL: http or FTP

Enable IPv4 Support (IPv4 options)
dynmic IP Configuration (DHCP )(Dynamic IP configuration): DHCP comes in to provide network configuration.
ManualConfiguration (Manual): Manually Enter the network configuration, including the IP address, mask, and DNS address.

Enable IPv6 Support (IPv6 options)
Automatic Neighbor Discovery(auto Neighbor Discovery): Use router ads (Router advertisement,ra) to create an automated, stateless configuration. (equivalent to the Automatic option in NetworkManager)
dynmic IP Configuration (DHCP (Dynamic IP configuration): No RA is used, but request information directly from DHCPV6 to create a stateful configuration. (equivalent to Automatic in NetworkManager, DHCP only option)
ManualConfiguration (Manual): Manually Enter the network configuration, including the IP address, mask, and DNS address.

Install or upgrade an existing system installation or upgrade of existing systems

install the system with basic video driver during installation with the base graphics driver

Rescue installed system to enter the repair mode

Boot from local drive exits installation from hard disk boot

Memory test RAM test

This article is from the "Fisherman" blog, please be sure to keep this source http://yufuos.blog.51cto.com/8898012/1408759