USB flash drive installation system tutorial

USB flash drive installation system tutorial

At present, USB flash drives are very useful, especially in computers without optical drives. It is very easy to use USB flash drives for system installation or maintenance. With a USB flash drive, you only need to click "start" to make a general USB flash drive into a boot USB flash drive that can start the computer. The following describes how to install a USB flash drive system!

First download and install the USB flash drive software "one-click USB flash drive system V3.3" on the Internet, and insert the USB flash drive into the computer. We recommend that you insert the desktop rear USB interface;

Start the "one-click USB flash drive system V3.3" software from the "Start" menu or on the desktop:

After the software is started, the system first detects the inserted USB flash drive. After detecting the inserted USB flash drive, it is displayed as follows:

 

Click the one-click USB boot disk creation button. A prompt message is displayed after a while (note that the USB flash drive will be replaced ):

Then, unplug the USB flash drive once as prompted. After re-insertion, copy the prepared GHO file to the GHO or root directory of the USB flash drive:

 

Now, your USB flash drive can be used to install the system or maintain the computer.
Then, insert the prepared USB flash drive into the computer that needs to be installed with a USB flash drive, and then boot the system from the USB flash drive (some computers can choose to start from USB when F9 or F12 is started );

After the USB flash drive is started successfully, select the first option and enter WinPE:

After entering WinPE, we double-click the "ONEKEY (one-click Restore)" icon on the desktop. The program will automatically find The GHO file you just placed in the root directory of the USB flash drive:

If it is not the GHO file, you can select the OPEN button next to it to find the desired GHO file:

After selecting the correct GHO, select "Restore partition" (the partition where your system is installed) and click "OK". A confirmation dialog box is displayed:

Select "yes" and continue to install the system:

Follow these steps to install the system with a USB flash drive!