Here are the steps you need to follow in order to make USB rndis work:
Setup device:
1. On the debug terminal, pressSPACEWhen prompted. Using the bootloader menu, set the boot deviceUSBFn RNDIS.
2. Set the debug deviceUSBFn RNDIS
3. In 'network settings ':
A. disable DHCP
B. Assign static IP Address
C. assign IP mask
4. In the bootloader main menu, select "exit and continue" to download image.
Setup host PC:
5. host PC will display 'found new hardware wizard'
6. Select 'No, not this time' and press next.
7. Select 'Install from a list or specific location then press 'Next' button
8. Ensure that 'search for the best driver in these locations 'is selected. Also ensure that 'include this location in the search' is selected and click 'browse "button.
9. In the 'browse for folder' window navigate to: 'C: \ WINCE600 \ PUBLIC \ COMMON \ OAK \ DRIVERS \ ETHDBG \ RNDISMINI \ host'
10. Press 'Next' button. RNDIS Connection is made.
11. In network connections, make sure to set an IP and subnet mask similar to that set on the device.
Example: Set IP as 192.168.1.24 and subnet mask as 255.255.255.0.
12. From Platform Builder, select Target | Connectivity Options. Set:
A.DownloadToEthernet
B.TransportToEthernet
C. Click on the Settings button and select the device (on the debug console, you shocould see that the device is sendingBOOTMEPackets ).
D. Apply these settings.
13. Attach the device