Use of ruijie in Wireless AP (Wireless Router ruijie wireless Internet access cannot authenticate AP)

Use of ruijie in Wireless AP (Wireless Router ruijie wireless Internet access cannot authenticate AP) [tested: win7, xp, ubuntu 12.04 LTS are OK]
Many campus networks or enterprise networks require ruijie verification. Although ruijie tries to control the use of wireless routers to prevent a single account from being shared by many people, many netizens are still busy with updating firmware on the Internet, the router system is used to load ruijie. Many technologies are involved here, which is difficult for users to deal. In fact, most of our netizens encounter this requirement: 1. Each person has a ruijie account; 2. They do not want to use a network cable to connect to IOT platform. 3. There are few network ports for a wired switch, and you want to extend the number in wireless mode. ----------------------- If the above situation is the case, it can still be done, but there are some details, I google, many people asked. For more information, see. Www.2cto.com ----------------------- 1 in this case, we use the function of an unlimited switch, which is usually called an AP, rather than a wireless router. Generally, the wireless router you buy has this function, and it is the default one. 2. You only need to do two things: [1] connect to the AP in a wireless or wired way (you need to set the corresponding IP address to access the AP. If you use a wired network, set the wired network card to 192.168.1. network Segment and wireless network adapter, but after the vro is restarted, If you need ruijie verification, you need to set it as your own private IP), set DNS to disabled, restart. At this time, the WAN port remains the default value, which is not used here. The LAN port of the school network cable connected to the AP is configured by default.
[2] You can experiment with it, set the wired network card to a private IP address, and then use ruijie for verification. If the verification succeeds, the network is normal. Then, disconnect the wired network and enable wireless connection, set the IP address to a private IP address (including your own DNS and gateway), and enable ruijie after wireless connection. Here, we need to add: After wireless connection to ruijie under Win7, we often cannot access the server. This is because of your wireless encryption problem. After I simply remove the wireless encryption (not set by default ), you can access it. Www.2cto.com 3 of course, for wireless security, it is immoral to do nothing without encryption. You can try whether the next-generation encryption method is OK, or directly disable the SSID and manually configure wireless. In this way, no one else can see your AP. --------------------- To put it simply, you have bought a new AP, set DNS to disabled, and then connect to it wirelessly. Others are actually default. ------------------------------- Many people fail to authenticate due to wireless encryption. Removing this is just a simple method. Maybe you have a better solution .. Author jo_say