VCSA 6.7version on2018years4Month17available for download at the same timeESXi 6.7, according to official documents,6.7version upgrades are primarily for publishingVSAN 6.7version.
Step 1 , download the vmware-vcsa-all-6.7.0-8217866 file, mount it with a virtual CD drive or unzip the run, select "Install",VCSA 6.7 version also provides other options.
Step 2 , Tip installation is divided into two stages.
Step 3 , tick "I accept the terms of the license Agreement".
Step 4 , select "Embedded PSC".
Step 5 , specify VCSA 6.7 to deploy to the ESXi host or VC.
Step 6 , prompt for the certificate warning, select Yes.
Step 7 , select the folder where the VCSA 6.7 virtual machine resides.
Step 8 , select the storage ESXi host.
Step 9 , configure the VCSA 6.7 virtual machine name and root password.
Step Ten , select the deployment size.
Step One , select VCSA 6.7 virtual machine storage.
First , configure the VCSA 6.7 virtual Machine network.
Step 1 , confirm the stage parameters.
Step One , start the first phase of deployment.
The time of deployment depends on the physical server performance.
Step up , during the deployment process,the VCSA 6.7 virtual machine power is turned on and can be PING -through.
Step One , complete the first phase of deployment and begin the second phase of deployment.
Step Two, start the second phase configuration.
Step, configure the NTP server.
Step # , configure the SSO parameters.
Step to confirm whether to join CEIP.
Step, confirm the parameters.
Step, determine the start of the second phase of deployment.
First step, start the configuration.
Step up, the service starts.
Step, the deployment time depends on the physical server performance.
Step One ,VCSA 6.7 The virtual machine console.
In the first step,VCSA 6.7 offers H5 and FLASH two options, from preliminary use,H5 function than VCSA 6.5 Be enhanced.
Step through , enter SSO login.
Step IV ,VCSA 6.7 H5 interface.
Step up,H5 homepage interface.
The first step,FLASH interface.
VCenter Server Appliance (VCSA) 6.7 Deployment Guide