Virtual machine installed Ubuntu (Kylin) frequently encountered problems

When you want to keep your Windows operating system while learning and developing with Linux, installing a dual system or installing a virtual machine is a good choice, depending on your situation.

(P.S: This line is for a two-system blog that will be written later)

This article collected their own in the use of VMware workstaion 12 installed ubuntu Kylin 15.10 64bit CD-ROM encountered some of the problems and Baidu after the solution, if there are any problems not summed up, is expected to shoot bricks, work together to improve.

1. Virtualization Technology is disabled

A hint box that may pop up the first time after a new virtual machine is created, roughly meaning:

you have configured this virtual machine to use a 64-bit guest operating system. However, 64-bit operating systems are not available. This host has virtualization support capabilities, but virtualization technology is disabled.

this is usually because the virtualization technology has been set or disabled in the BIOS/firmware or the host does not have permission to change this setting. Please:

(1) Verify bios/firmware settings VT Enable and disable ' trusted execution. '

(2) If these bios/firmware settings are changed, reboot the host power.

(3) Install the VMware Workstation and reboot the host.

(4) update to the latest version of the bios/firmware.

For more details, see http://vmware.com/info?id=152.

You need to restart your computer to enter BIOS settings, enable (enable) Processor Virtualization Technology (security->virtualization) and press F10 to save and restart

(The BIOS interface differs depending on the motherboard, as shown in the example of HP)

2.BIOS can't go in.

When you want to enter the BIOS setup, find out how to press ESC, F123 ... is not working, only to find that it is Windows8 above system to achieve fast boot effect shielded bios

(Windows8 above, the computer does not shut down, just into the sleep mode, is not open the BIOS)

Simply right-click the Start menu-power option , and on the right side of the open window, tap the " Select power button's function " and the results

Here you can see the " Enable Quick Launch (recommended)" option below, the default is gray cannot be changed, click "Change currently unavailable settings"

Please refer to http://www.udangjia.com/article/405.html for details.

3.internal error (internal error)

This is because the VMware Licensing service is not turned on, it can be found and opened

Workaround:

start-To-run (shortcut key: win+r)

Enter services.msc carriage return

find VMware Authorization Service Right-click Start (Start)

Otherwise you will need to reinstall VMware

As shown in the following:

4. Chinese Language Pack Configuration

I thought it was Ubuntu Kylin incomplete, only the installation interface, desktop "home folder" "Recycle Bin", the upper right corner of the weather, calendar gadget finished

The reason for this is that the entire VMware installation process is automated, and the language selection box that should be present does not pop up

There are two kinds of workarounds----Reload and manual configuration:

① Re-assembly

Enter the virtual machine BIOS CD-ROM to boot into the normal installation process, then the language selection box will pop up

② manual Configuration

Click on the upper right corner of the Settings button->system settings->languageSupport, drag the menu bar Chinese (China) to the top and click Apply systen-wide Save, restart can

It's a good idea to change the number, date, and Currency amount format in the tab Regional Formats(region format) to Chinese (China) and apply Systen-wide before restarting

5.vim No problem

Ubuntu itself has VI without vim, so the input vim under the terminal will get the following result:

At this point just follow the prompts (again under the conditions of networking), the terminal followed by Enter:

sudo apt-get update (This command is optional, preferably with the update source again)

sudo apt-get install vim

Wait for the update to complete after you enter the highest privilege root password set at installation

6. Installing Virtual machine full-screen problem

Combined with the experience of installing Ubuntu multiple times in a virtual machine with multiple computers, the Ubuntu installation does not automatically complete the full screen and requires manual setup

As the following sharing is done with the card on the second link (VMware Tools) is not successful, here are the links to these solutions first

Http://jingyan.baidu.com/article/f7ff0bfc13d02f2e26bb13af.html

Http://zhidao.baidu.com/link?url=WHUjkmZ1AW8CoZV7W_Gpop3f0eJdr92_rzHSIrdVg3bfh4H1DGfimOV9dYtqEyz6aPUCGW2SwBqP5zB6mAnVQK

Virtual machine installed Ubuntu (Kylin) frequently encountered problems