VMware install RedFlag-6.x for Linux

1, RedFlag-6.x for Linux, Red Flag version 6.0 or above can not be started on VMWare Workstation, has been stuck in the boot 6 word interface, the main reason is because of the Virtual Disk Type VMware recommended is SCSI, so it cannot be enabled.

2. file --> create a virtual optical drive. The following error occurs:

Note: select Custom because the recommended disk type SCSI is used by default.

3. As shown in:

4. I personally recommend using the installation image file. Because I use the installation disk, the optical drive will die. A waste of time.

5. Select the desired version:

6. Enter the name and location of the VM and try to store the VM on a hard disk with a large disk space.

7. I use a bridge because I need a fixed IP address to build a database.

8. For example:

9. For example:

10. Select ide. Otherwise, it cannot be started.

11. It is recommended that the disk space be larger than 20 GB. I have not installed enough 15 GB. I have installed some software in Hongqi.

12. For example:

13. Create a virtual machine

Install Linux, view http://blog.csdn.net/yu624774720hua/article/details/7566359