What about the reflection on the notebook screen

Notebook screen Reflective How to do, what can be done? Screen Saver film, there is the penetration of reflective, or simple point, paste a matte film, of course, can not be completely eliminated, can only weaken the reflective.

Note: Anti-glare = Matte = not reflective. But there are few people who actually stick the abrasive film. You can try, in a small piece affixed to the screen, after the boot to see if you do not feel the impact of use, and then the entire screen into glare-proof foil.

Notebook Film Tutorial:

In fact, completely do not understand the film, as long as a simple study, immediately can grasp the know-how, become a film master. Even if you do not have the talent of the film does not matter, because it is no glue electrostatic adsorption, the computer opened the opportunity screen will slowly after we paste the film generated bubbles rise out, so that it has a professional film effect.

Let's take a hands-on film teaching, introduction of the crash-level film method:

The first step: Find a clean face, wipe the notebook screen carefully clean, the cleaner the better. This can prevent the film when dust is sealed in the inside, affecting the film effect and create bubbles. If there is no pure cotton cloth or reluctant to use a good towel, you can also use a clean notebook cleaning three sets, but also a few dollars.

The second step: First look at their own buy screen film size is not the same as the notebook, do not do oolong thing. Next find the small sticker on the screen, and first fold the sticker labeled Number 2 as above,

Then put the screen in turn, labeled with the number 1 sticker facing down, this side is affixed to the screen, the first to uncover a point on it.

Officially began to paste, this time the gas should be flat, hand to stabilize, slowly along the side of the notebook screen, keep the film and screen edge parallel, slowly put down. Because the film has electrostatic adsorption ability, so will automatically adsorption to the screen.

Although the film is good, a lot of accidents, we are likely to encounter two kinds of things do not want to see happen. One of them is that there is no clean dust to cause the air to fill up. The solution is to find tape paper to stick the dust off.

The second situation is that even though we carefully and carefully, paste it may still remain some small bubbles, under normal circumstances as long as electrostatic adsorption of the film will disappear for a week or so, so the choice of laptop screen protection film must choose the electrostatic absorption of the protective film. The film is priced at around 6 yuan on the Internet.

Finally completed, the quality of a good screen protection film a total of three layers, paste it after the two layers are removed, leaving only the middle layer is good. Film is so simple, everyone can become a master, there is no need to spend dozens of yuan to honor the so-called professionals, and their own hands not too long time, there is fun, why not?