What is a channel without a line?

Typically the default is channel 6 or auto. You can use Wirelessmon software to find the signal channel around your AP, and then learn what your nearest AP signal channel is.

1.6.11. These channels are used more, because their signal frequency is a ladder type, the lowest coverage, that is, the impact of the smallest, so it is recommended in your nearest AP signal Channel Add a layer, it is 6, you choose 11, it is 1, you choose 6.

Wirelessmon Download: http://xiazai.zol.com.cn/detail/14/136314.shtml

Wirelessmon is a tool that allows users to monitor the status of wireless adapters and aggregation, display peripheral wireless access points or base station real-time information, list the signal strength between the computer and the base station, monitor the transmission speed of the wireless network in real time, so that we can understand the speed of the network download or its stability.

Installation process I will not nonsense, very simple answer, when finished, open the Wirelessmon main interface, you can select network card to the right of the Drop-down menu to choose the corresponding wireless network adapter, it should be noted that, since it is called Wirelessmon, You can only monitor the wireless network and cannot support the wired network speed test.

In the middle right area to see the current environment in the surrounding wireless network signal basic situation, where the main display is wireless channel related information, including a few 2 channels, there are several 6 channels, and so on, there is a toggle button below can be replaced in 802.11a and 802.11b/g mode, It is estimated that the vast majority of people use wireless networks are b/g, but do not know why there is no future trend of 802.11n switching.

In the large area below we can see the current environment scan to the basic wireless network information, including the status is available, SSID information, the use of the launch band, whether encrypted transmission, rssi signal strength, the purpose of wireless network basic transmission speed mode, wireless router or AP MAC address, Wireless network composition mode (point-to-point or point-to-point), the time of the basic information, etc., through this area of information we can clearly understand the composition of the surrounding wireless network.

My wireless router can set the signal strength, this is to set the router to the minimum 28mW launch power when the monitoring data, you can see the signal is -52dbm/47%.

In the same position, set into the maximum 281mW time signal monitoring data, you can obviously see the signal edge strong, there is -38dbm/65%. However, we recommend that you do not exceed 100mW, or how many harm to the human body, dd-wrt default is the smallest 28mW, as far as I am concerned, 28mW is enough.

In addition to the above mentioned wireless signal scanning function, Wirelessmon also provides signal strength detection, monitoring wireless network transmission speed and icon generation functions, point main interface to the left of the graphs, the horizontal axis is the time coordinate, and the ordinate can be chosen by our parameters, including signal Strength percentage,signal Strength (DBM), received rate,sent rate,total data rate, and so on, so that we can understand the network download speed or its stability.

With the gradual development of wireless technology, the price of wireless products continue to lower, more and more enterprises began to focus on the enterprise intranet into a wireless network, but do you know how the various devices in the wireless network to put it? Do you understand that wireless network is the most taboo is the location of the signal blind spot problem?

Today to introduce you to the Wirelessmon is a good wireless signal scanning and monitoring tools, through which we can more suitable for the establishment of a more efficient wireless intranet, can also see the purchase of wireless product signals in the end good, is not enough stability.

Wirelessmon is a tool that allows users to monitor the status of wireless adapters and aggregation, display peripheral wireless access points or base station real-time information, list the signal strength between the computer and the base station, monitor the transmission speed of the wireless network in real time, so that we can understand the speed of the network download or its stability.

Installation process I will not nonsense, very simple answer, when finished, open the Wirelessmon main interface, you can select network card to the right of the Drop-down menu to choose the corresponding wireless network adapter, it should be noted that, since it is called Wirelessmon, You can only monitor the wireless network and cannot support the wired network speed test.

In the middle right area to see the current environment in the surrounding wireless network signal basic situation, where the main display is wireless channel related information, including a few 2 channels, there are several 6 channels, and so on, there is a toggle button below can be replaced in 802.11a and 802.11b/g mode, It is estimated that the vast majority of people use wireless networks are b/g, but do not know why there is no future trend of 802.11n switching.

In the large area below we can see the current environment scan to the basic wireless network information, including the status is available, SSID information, the use of the launch band, whether encrypted transmission, rssi signal strength, the purpose of wireless network basic transmission speed mode, wireless router or AP MAC address, Wireless network composition mode (point-to-point or point-to-point), the time of the basic information, etc., through this area of information we can clearly understand the composition of the surrounding wireless network.

In the same position, set into the maximum 281mW time signal monitoring data, you can obviously see the signal edge strong, there is -38dbm/65%. However, we recommend that you do not exceed 100mW, or how many harm to the human body, dd-wrt default is the smallest 28mW, as far as I am concerned, 28mW is enough.

In addition to the above mentioned wireless signal scanning function, Wirelessmon also provides signal strength detection, monitoring wireless network transmission speed and icon generation functions, point main interface to the left of the graphs, the horizontal axis is the time coordinate, and the ordinate can be chosen by our parameters, including signal Strength percentage,signal Strength (DBM), received rate,sent rate,total data rate, and so on, so that we can understand the network download speed or its stability.