What is a USB flash disk production tool?

1. What is a mass production tool?
Volume refers to the meaning of batch, that is, a mass production tool can produce a lot of U disks at a time, as long as you have enough USB holes.
The production tool is a low-layer software developed by the manufacturer for operating the USB flash drive master chip. Its function is as follows:
1) low-end USB flash drives
2) producing encrypted Disks
3) Partitions: Read-Only partitions can be produced and the USB flash drive media type (removabel and fixed) can be changed)
4) The amount of output USB-CDROM, which can be used to start the disc
5) The read/write speed of some USB flash disks can be greatly improved after childbirth.

The Production Tool can be abbreviated as the MP Tool. For more details, it is the Mass Production Tool, which represents a Mass Production Tool and software.

2. Do USB flash drives made up of card readers generate CDROM?
No, maybe there will be such a card reader in the future.

3. Is mobile hard drive energy available?
Currently, this is not the case. The company is working on this. It is suggested that the annual meeting will be held.
If such a tool is used, sales of CD/DVD may be greatly reduced.

4. Can all USB flash drives be created in mass production?
Yes, it depends on whether there is a suitable mass production tool released. The master control vendors certainly do.

5. How to Determine the USB flash drive master?
1) Use the ChipGenius software to detect
2) the most accurate method-disk Removal

6. What is the best production tool?
Almost all of them are not skilled.

7. What should I pay attention to when using mass production tools?
1) Don't be afraid. Make sure that the USB flash drive is not broken.
2) When there are also frequent errors in mass production, such as USB flash drives turning into 8 M, then proceed again.

8. The maximum amount of CD-ROM output can be big?
Different versions have different brands. My 4g icreate can generate more than 1 GB. Developers will not disclose this technical indicator.
Now some masters can produce DVDs, which can reach 4 GB.

9. Is the higher the production tool version, the better?
Not necessarily. Check whether your USB flash drive is supported.

10. What is the compatibility and speed of CDROM startup?
New motherboard almost all can, the old motherboard some USB-HDD or USB-ZIP are not good, but CDROM can; if the motherboard supports USB2.0 and open "high speed ", USB flash drives also support USB, which is fast to start. This is an example of how to install WinXP.

11. Why cannot different production tools be used in general?
The main difference is that the master control chips of different manufacturers all have their own confidential commands and functions, and they are not universal.

12. Why does some CDROM succeed after being started twice?
This involves BIOS content. Different BIOS processing conditions are different. We do not have such experts here. During crack vista, such as BINBIN, BIOS experts came forward to solve many problems. Of course, they are for AWARD. As for AMI, there is no such public program. It would be nice to solve the problem of identifying usb cdrom from the BIOS level.

13. Where can I get the production tool?
1) from the U disk manufacturer's website, generally the master developer gives them the master.
2) download from the website of Digital Home. The update is fast and complete.
3) Search for networks, including networks and
4) call or send an EMAIL

14. Can MP3, MP4, and other devices be used as boot disks?
The hardware is almost the same. Generally can only do USB-HDD start

15. How can I use the remaining space after mass production is CDROM?
The remaining space is identified as an independent USB flash drive, which can be made into a fixed Disk for Further partitioning, or a removable disk. The remaining space can be used for startup or as a general USB flash drive to store files.

16. Can the production tool run under VISTA?
Currently, this is not acceptable. There will be various errors in VISTA.

17. If the CDROM output by the test volume is successful?
After mass production is complete, a large number of people cannot start up with several machines. How can I determine whether it is successful? It's easy to use a virtual machine. when starting the machine, select CDROM to start it first. If it succeeds, there will be no problems with mass production.

18. A strange phenomenon
When you encounter a motherboard, there is no problem when usb cdrom is started for the first time, but the second time, it will not work and it will stop, saying there is no system. The solution is to reset usb cdrom to the first BOOT in the bios boot sequence and save the BIOS.

19. What should I do if I cannot use software to remedy the production failure?
Transient FLASH pin, restore to factory status!
Some solutions can be restored using corresponding tools.

20. What are the start modes of mass production?
There are USB-CDROM, USB-HDD (the two most commonly used), as well as USB-ZIP, USB-FDD (analog soft drive) and so on

Related:
Summarize the preparations and precautions for the pre-production of USB flash drives.
Http://bbs.mydigit.cn/read.php? Tid = 79204

Diagram of BIOS settings related to USB flash drive startup
Http://bbs.mydigit.cn/read.php? Tid = 68831