What if I can't open the Web page?

Why can't I open the Web page cause analysis

1. Speed problem
2. Virus problem
3. Computer Configuration Speed problem

Here are a few ways to fix this:

1. Safe Mode to check if there is a virus,
2. Or reinstall the browser to see if there is a similar situation
3. Try changing other browsers
4. Use another computer to link your network cable test, if there is a similar situation, indicating that your speed problem
5. Last resort. Repair system

Use 360 security guards

1. If you use 360 security guards, please click on the lower right corner to open 360 security guards, the location shown in the following figure:

2. In the 360 Security guard window to the right, the Functional encyclopedia column, find the broken nets first aid box, if not found, please click More This button:

3. Click on the emergency box to repair the network:

4. In the pop-up 360 emergency kit, click the Comprehensive Diagnostics button, as shown in the following image:

5. After the completion of the diagnosis, click on a key repair, the location shown in the following figure:

6. The repair succeeds as shown in the following illustration:

If the above method is still not resolved I can refer to the following steps to analyze

1. Check your network connection to see if the Web page cannot be opened because of network reasons.

2. Click on the System tray Network connection icon, in the pop-up menu check the network is connected, if the display is not connected, please click on the connection. If the display is connected, click the Disconnect button and reconnect, because sometimes the connection is displayed and the actual network is disconnected.

3. If you do the above, still can not open the normal, to check whether your computer's security software to prevent the browser to open the Web page. For example, there are some security software to prevent access to the site function, as long as the cancellation of this function can be.

4. Another possibility is that the system firewall prevents the browser program from running, opens the control Panel, clicks the Firewall option, chooses to use the recommended setting

5. Then click on the left side of the navigation bar of the Advanced settings options, if the system opened the account security control will be dark screen, choose to pass.

6. Find the location of your browser in the advanced settings, such as the figure, see whether it is blocked access to the network, if there is, click this option, and then select the release can be canceled to stop.

7. IE cannot open Web pages caused by DNS errors, usually due to problems with the DNS server itself, or the user's DNS server address is incorrect. The use of broadband Internet users, DNS is automatically obtained, for such a QQ can not open the Web page phenomenon, you can use the Ipconfig/flushdns command to regain; or to set the DNS server address to 8.8.8.8 (this is the free Domain name resolution server address that Google provides )。 Local Area network users, if not open the Web page, and see DNS error prompts, most of the gateway set up problems, need to network management solution.

can be on QQ but can't open web page how to do

1. Click the Start menu, click Control Panel, and then double-click Network Connections

2. Right-click the "Local Area Connection" icon, pop-up menu select "Properties" command

3. Under the General tab, this connection uses the following list of items to double-click Internet Protocol (TCP/IP)

4. If you are currently using "Automatically obtain IP address", select "Use the following IP address" and assign it an IP address and DNS server, and if the IP address and DNS server are already assigned, get the correct IP address and DNS server to the local network operator to replace

set up a proxy server

1. Some friends set up a proxy server to open the Web page, and QQ use is 4000 ports, access to the Internet use is 80 or 8080 ports, so this is why QQ but can not open the Web page reasons.
Right-click the Internet Explorer icon on the desktop, and open the menu by clicking the Properties command

2. Open the Internet Properties window, switch to the Connection tab, and click the LAN Settings button

3. Remove the "Automatically detect settings" and "Use proxy server for LAN" check box, click "OK" button