WiFi Access Internet configuration process

Reprint Please specify source: http://club.gizwits.com/thread-256-1-1.html

Airlink mode
The GoKit2 generation configures the route SSID and password methods as follows:
1, GoKit2 Power on
2, Long press the Key1 key, to be on the WiFi module on the red light Solid (Gokit function version of the RGB lamp turned red) after entering the next
3, Long press Key2 key, to the WiFi module green light flashing (Gokit function version of the RGB lamp turned green) after entering the next
4. Open the demo APP, select "Add Device", enter the SSID password
5, prompt configuration completed after the configuration

Soft AP Mode-web (browser)
1, GoKit2 Power on
2, Long press the Key1 key, to be on the WiFi module on the red light Solid (Gokit function version of the RGB lamp turned red) after entering the next
3, open the mobile WiFi, find hot "xpg-gagent-xxxx", the password is "123456789", connected to the next step after entering
4, open the browser, enter "10.10.100.254", the page switch to the SSID and password configuration page
5. Enter the SSID and password for the route, click the Configure button
6. Complete configuration after prompt success

Soft AP Mode-demo APP
1, GoKit2 Power on
2, Long press the Key1 key, to be on the WiFi module on the red light Solid (Gokit function version of the RGB lamp turned red) after entering the next
3, open the mobile WiFi, find hot "xpg-gagent-xxxx", the password is "123456789", connected to the next step after entering
4. Open the demo APP, select the route SSID that needs to be connected in the list, enter the routing password in the box, click the Configure button
5. Complete configuration after prompt success

WiFi Access Internet configuration process