WiFi Sharing Wizard Wireless card is disabled or taken over the solution tutorial

XP, Win7, win8 users note that you should never disable the wireless card when you use the WiFi-sharing wizard at home! Because the software creates a WiFi hotspot is created by a wireless network card.

If you accidentally disable the wireless card, there is no need to worry, small editing to teach you to enable the wireless card Method!

Now follow me to operate it!

First step, open the network connection:

Win7/win8 How to open a network connection: network-network and Sharing center-change adapters-access is;

XP to open a network connection: the right mouse click property of the Internet neighborhood-enter is;

In the second step, let's get to know which is the wireless card:

Wireless card: With "Wireless" is a wireless network card, some Chinese "wireless";

The third step, we have to understand the wireless network card services:

WIN7/WIN8 View wireless network card services: Computer Right-click-Management-Services

XP View wireless network card services: My Computer Right-click-Management-Services

Wireless network card Services: WLAN AutoConfig must show enabled

The third step, we know the network connection, the wireless network card, as well as the wireless network card service next we begin to operate!

If you open the WiFi Sharing wizard, the software interface prompts you "no wireless card", do not worry, we have to exclude the following factors;

Are you a desktop computer? If it is possible there is no wireless network card, you must add a USB wireless network card, remember to support the soft AP of the kind of wireless network card! If you already have an external wireless network card, we will see if you have also disabled or occupied the wireless card.

For situations where the wireless card is disabled,

Workaround: Just select the wireless network card--Right click--enabled. It's OK.

XP is disabled

WIN7 is disabled

For the wireless card by the utility program to take over the general appearance in the XP system more users: similar to the wireless network card switch is not turned on, but the solution is different. As shown in figure:

XP Demo

WORKAROUND: Click Change advanced Settings-Wireless network configuration-tick windows to configure my wireless network settings--OK

Check to make sure you can

The WIN7 demo needs to be set in the utility, because each wireless card has a different number of different utilities, but the operation is similar to using Windows to take over in the utility. Once the setup is finished, we can see that the normal wireless signal is displayed in the wireless area.

XP normal state

Win7 Normal state

Now we can turn on the WiFi Sharing wizard to start the work!

Note: Everyone in the use of software, XP users if it is wireless in the Internet, be sure to empty a wireless card into the state of disconnection "X" (You can also add a USB). Or to change the way the Internet, for cost of networking or broadband. Disconnect the wireless card.

If none of the above can be shared on the Internet, see if your computer supports wireless soft AP.

How to view: computer (My Computer)--management--Device Manager--network adapter, there will generally be more than two network cards, if not, you can buy WiFi hardware to solve the problem.