ADSL Hard Equipment installation In fact, there is not much mystery, simply said to use a network card to connect the computer and ADSL modem. and ADSL installation, most of the line providers will be dedicated to send technicians to the user's home to the on-site installation, commissioning, no need for user affinity, so no longer to say more. This article will focus on the user in the Windows 2000 environment and how to use ADSL in the LAN settings method (under the WIN98 of the specific settings, ADSL with the user manual has a detailed introduction).
(Note: In this paper, the most common Alcatel ADSL modem For example, the following setting method is also applicable to ordinary single user. )
1. First on the desktop with the right mouse click on the "Network Neighborhood," Pop-up shortcut menu, select the "Properties" option.
2. Click on the "Properties" option to open the "Network and dial-up Connections" window, with the right mouse click "Local Connection", select the "Properties" option.
3. Click the "Properties" option to open the Local Area Connection Properties window, select "Internet Protocol (TCP/IP)" In the Component window, and select the Properties option.
4. Click on the "Properties" option, open the Internet Protocol (TCP/IP) Properties window, fill in the IP address of the intranet and subnet mask, click "OK" (the address of the DNS server is provided in advance by the local ISP).
5. In the Network and Dial-up Connections window, right-click the new Connection icon, and select New Connection (N) ....
6. Click "New Connection (N) ..." To open the Network Connection Wizard window.
7. Click "Next" and select "Connect to a private network via the Internet" in the "following selection".
8. Click "Next" to fill in the Address bar with the server-side address (the IP address entered is provided in advance by the local ISP).
9. Click "Next", if it is a stand-alone internet select "Just my own Use this connection", the local area network is selected "All users use this connection."
10. Click "Next" and type the connection name in the blank, and then click "Finish".