Windows 7 and Linux dual system installation

Precautions:

1, when installing Linux, be sure to select "Free" hard drive to create standard partition, otherwise will format C or D disk Windows data. "If the/dev/sda1 is the main partition of the C-drive, the SDA2 is the extended partition---There are D, E, and F disks. So the D plate is/sda5. Because there will be a total of 4 primary partitions "

When installing the system, be sure to see Clearly, Windows default installation on the C drive, that is,/dev/sda1, do not format, otherwise can not start Windows

2, when the boot, there is grub, directly into the BIOS, Del keyboard, starting from the USB stick. (Before you overwrite that file, of course)

3, the default startup if you choose Windows (that is, the other, you can edit the changes to Windows), when you start, Linux around. So the default is to choose Linux

4, to choose Desk desktop can be graphical. Basic server is just a command-line mode

--------------------------------------------------------------

1, ultraiso→ i386 DVD1 write to the hard disk image file
2. Copy the DVD1 and DVD2 to the root directory
3, this directory on the USB stick U:\syslinux overwrite this file vesamenu.c32

1. (Note: Space should not be partitioned in natural state.) ）
2, note that the boot installation driver others modified to default, and modify the name of Windows 7
3, the other first Bois for the hard disk SDA that Win7 start disk, the second Bois is the U disk.

/20G "is also the default after adding two 0 20000m=20g"
/boot 200m 200m "default"
Swap 2G 2000m "plus one 0,2g swap memory, enough"
/Home 10G
/user 10G

December 2014 on 29
1, to choose Desk desktop can be graphical. Basic server is just a command-line mode
2, the first selection of SDA or SDB to pay special attention to the start from the U disk, so it is SDB
3, space format, where to create hard disk, must not be casually formatted, to watch, otherwise, cry
4, guide the system here, this will be infinite loop is here.

20150104
1. Computer → management → disk management → allocate 100G

2, appear grub, ignore, direct BIOS boot from hard disk installation

3, to choose China-simple installation →us→hard Drive (hard disk installation) →sdb (U-disk installation) behind the next step, the next step. Basic storage → Custom partitioning (very easy to format, be aware) → custom layouts →desk desktop

-----------------------

If Windows and Linux appear, default to Windows, there is no Linux selection interface, you can use EASYBCD boot to create a

Windows 7 and Linux dual system installation