Windows 7 computer boot prompt: 0xc000000f error can not enter the system how to do?

As shown in the following figure, we turned on the computer and there was a blue screen.

Error code appears 0xc000000f

Cause analysis

This type of error occurs when the system file is missing or corrupted, so we just need to make a change to the relevant file.

Solutions

1. The system is broken can only boot from the optical drive, we are ready to install the Windows7 system CD-ROM and then into the CD-ROM drive into the boot:

2. Then we see the "Press any key to boot from CD or DVD ..." or "Press any key to start from CD" on it.

3. After entering the optical drive interface, we click "Repair Computer" as shown in the following image.

4. We will see a "Fix and reboot" button when we click on the repair and the "System Restore Option" appears. You can first try this workaround (most of the time reboot is normal), if the operation is still unable to start, restart this interface again select "No", as shown in Figure 4:

5. And then in the open window, we go to the command prompt.

6. As shown in the following figure, now we enter the BOOTREC/FIXMBR, then press ENTER after the Bootrec/fixboot, press ENTER, enter the BOOTREC/REBUILDBCD, and then hint that we enter "Y"

7. As shown above will tell us that the repair is successful, now our last step just restart the computer to see if the repair is successful Ah, if there is no optical drive on the use of U disk to start it, use USB can be repaired OH.