Windows 7 hard drive installation method requires no dial

Windows 7 hard drive Installation Method
The following four methods are all new Windows 7 installation methods, and Vista and Windows 7 installation methods are the same.
1. windows 7:
1. Download the Windows 7 ISO image and use the virtual optical drive to copy it to a non-C disk (for example, d: win7)
2. Press F8-repair system-select the last command to fix the problem. In the command box, enter d: win7sourcessetup.exe to start installation.
3. Go to the installation page and select custom for installation.
4. Select the installation language and format the C drive.
5. OK. After installation, it is a pure system (non-Dual System ).

 
2. If you have a vista installation disk, the method is also very simple:
1. Download the Windows 7 ISO image and use the virtual optical drive to copy it to a non-C disk (for example, d: win7)
2. Enable the optical drive in the BIOS to go To the vista installation page.
3. Select repair computer in the lower left corner (automatically search for the system, and prompt to load or close the driver. Select disable to enter the Repair Option)
4. Select the last command to fix it. In the command box, enter d: win7sourcessetup.exe to start installation.
5. Select the installation language and format the C drive (even if the C drive has no system)

 
Iii. windows 7 installation in windows XP:
1. Download the windows 7 ISO image and use the virtual optical drive to copy it to a non-C disk (for example, d: win7)
2. Put the bootmgr and boot directories under the d: win7 directory (in fact, as long as the boot. sdi and bcd files) are copied to the c root directory, and a sources folder is created under the C root directory.
3. Copy boot. wim under d: win7sources to the sources folder created on drive C.
4. Run cmd as an administrator, and enter "c: ootootsect.exe/nt60 c:" successful "(success !)
5. Close the cmd window and restart the computer. The installation interface is automatically displayed. Select the installation language and the appropriate time and currency display type and keyboard and input mode.
6. The "Start installation interface" appears. (Note that you do not need to click "Install now".) Click "repair my computer" in the lower left corner to go to "System Recovery selection ", select the last "command prompt" (command prompt) to enter the DOS window.
7. Enter d: win7sourcessetup.exe to start installation.
8. Select the installation language and format the C drive.

 
4. Install windows 7 in the vista system (it has been proved that XP is more convenient to use this method ):
1. Download the windows 7 ISO image and use the virtual optical drive to copy it to a non-C disk (for example, d: win7)
2. Copy the Boot, EFI, sources, and bootmgr folders in the d: win7 folder to the C root directory (administrator privilege required)
3. Copy d: bootsect.exe under win7ootto the C root directory.
4. Run cmd as an administrator, enter c: ootsect.exe/nt60 c: And press enter (it is best to copy the file with a blank space in the middle)
5. restart the system to automatically go to the installation page, and click repair computer repair my computer in the lower left corner)
6. Select the last command prompt to enter the DOS window. Enter d: win7sourcessetup.exe to enter the installation interface.
7. Select the installation language and format the C drive.

 
5. Install windows 7 in the PE system:
1. Download the windows 7 ISO image and use the virtual optical drive to copy it to a non-C disk (for example, d: win7)
2. Put the bootmgr and boot directories under the d: win7 directory (in fact, as long as the boot. sdi and bcd files) are copied to the c root directory, and a sources folder is created under the C root directory.
3. Copy boot. win under d: win7sources to the sources folder created on drive C.
4. Run cmd and enter c: ootootsect.exe/nt60 c: the successful prompt is displayed !)
5. Close the cmd window, restart the computer, automatically enter the installation interface, select the installation language, and select the appropriate time and currency display type and keyboard and input mode.
6. The "Start installation interface" appears. (Note that you do not need to click "Install now".) Click "repair mycomputer" in the lower left corner to go to "System Recovery selection ", select the last command prompt (commandprompt) to enter the DOS window.
7. Enter d: win7sourcessetup.exe to start installation.
8. Select the installation language and format the C drive.