Windows Error Code Overview 2

3000 the specified print monitor is unknown.
3001 the specified printer driver is in use.
3002 offline files cannot be found.
3003 startdocprinter is not called.
3004 addjob call has not been issued.
3005 the specified print Handler has been installed.
3006 the specified print monitoring program has been installed.
3007 the specified print monitor does not have the required functions.
3008 the specified printer monitor is in use.
3009 this operation request is not allowed when the printer has a job queue.
3010 the request is successful. The change takes effect only when the system is restarted.

3011 the request is successful. The change takes effect only when the service is restarted.
3012 the printer cannot be found.
4000 wins encountered an execution error when processing the command.
4001 the local wins cannot be deleted.
4002 failed to import from file.
4003 backup failed. Have you performed a complete backup before?
4004 backup failed. Check the target directory of the backup database.
4005 the name does not exist in the WINS database.
4006 copying of unconfigured parts is not allowed.
4100 the DHCP Client obtains an IP address that has been used online. The Local interface is disabled until the DHCP Client obtains a new address.
4200 the WMI data provider cannot identify whether the sent GUID is valid.

4201 the WMI data provider cannot identify whether the incoming Instance name is valid.
4202 the WMI data provider cannot identify whether the incoming data project identifier is valid.
4203 WMI request cannot be completed. Please try again.
4204 the WMI data provider cannot be found.
4205 the WMI data provider references an unregistered instance group.
4206 WMI data block or event notification is enabled.
4207 WMI data blocks are no longer available.
4208 WMI data service unavailable.
4209 the WMI data provider cannot complete the request.
4210 wmi mof information is invalid.

4211 the WMI registration information is invalid.
4212 WMI data block or event notification is disabled.
4213 the WMI data project or data block is read-only.
4214 WMI data items or data blocks cannot be changed.
6118 the server list of the working group is currently unavailable.
6200 to run properly, the configuration of the Task Scheduler Service must run in the system account. A separate task can be configured to run in another account.

7001 the specified session name is invalid.
7002 the specified protocol driver is invalid.
7003 the specified protocol driver cannot be found in the system path.
7004 the specified terminal connection driver cannot be found in the system path.
7005 you cannot create an event log registration key for this session.
7006 a service with the same name already exists in the system.
7007 the previous session close operation is suspended.
7008 there is no available output buffer.
7009 the modem. inf file cannot be found.
7010 The Modem name is not found in modem. INF.

7011 the modem does not accept the commands sent to it. Verify that the configured modem matches the connected modem.
7012 the modem does not respond to the command sent to it. Verify that the modem is properly wired and the power switch is on.
7013 due to disconnection, the carrier detection fails or the carrier is stopped.
7014 No dial-up sound was found within the required time. Confirm that the telephone line is correctly connected and can be used.
7015 the busy line signal was detected during remote site call back.
7016 sound was detected on the remote site during call back.
7017 transmission driver error

7022 cannot find the specified session.
7023 the specified session name is in use.
7024 unable to complete the request because the terminal connection is currently busy processing a connection, disconnecting, resetting, or deleting operation.
7025 try to connect to a session whose video mode is not supported by the current customer.
7035 the application attempted to start the DOS graphics mode. The dos graphics mode is not supported.
7037 your interactive logon permission has been disabled. Contact your administrator.
7038 the requested operation can only be performed on the system console. This is usually the result that a driver or system DLL requires direct console access.
7040 the customer fails to respond to the server connection message.

7041 console session disconnection is not supported.
7042 you cannot re-connect a disconnected session to the console.
7044 the request to remotely control another session is rejected.
7045 the request for session access is denied.
7049 the specified terminal connection driver is invalid.
7050 the request session cannot be remotely controlled. This may be because the session is interrupted or no user is currently logged on. In addition, you cannot remotely control a session or remote control system console from the system console. In addition, you cannot remotely control your current session.

7051 the request session is not configured to allow remote control.
7052 the application to connect to the terminal server is rejected. The Terminal Server client license is currently in use by another user. Contact the system administrator to obtain a new Terminal Server customer whose license number must be valid and unique.
7053 the application to connect to the terminal server is rejected. You have not entered your Terminal Server client license number for this client. Contact the system administrator to enter a valid and unique license number for the client.
7054 the system has reached its authorized logon limit. Please try again later.
7055 the customer you are using does not have the authorization to use the system. Your login request is rejected.
7056 the system license has expired. Your login request is rejected.