Lab System: Two Windows Server 2008R2
Server PC5 IP Address:192.168.10.1
Client PC6 IP Address:192.168.10.2
Lab Software: Microsoft ISCSI Software Target 3.3
experimental Purpose: Using Windows Server 2008R2 configuring ISCSI Storage
because Windows Server 2008R2 Enterprise itself does not have the ISCSI Server feature only initiator, so you need to download the Microsoft plugin from the Web to enable this feature.
Target3.3 Plugin Address:
Https://download.microsoft.com/download/2/F/1/2F110B9C-6CB0-45F1-971B-4BA37395D820/iscsiTargetqfe6.exe
PC5:
Add a 20G hard disk to the server F: Virtual Disk as ISCSI
First, download the plug-in to extract the good
re-extract folder x64 installation Iscsitarget_public.msi
Installation does not need to choose the next step
Restart after installation is complete -the Microsoft iSCSI software Target can be found in the management tool
Open iscsitarget and create ISCSI Target Wizard
Target Name Custom use Stu here
Here you need to create a IQN identifiers , identifiers can be DNS domain names,IP addresses,MAC addresses. Here we enter the server IP address 192.168.10.1 as the identifier for this initiator
Start adding virtual disks after creating a good target
Create a virtual disk file, where F: Create a virtual file in disk such as stu.vhd
This is where all the capacity of the disk is divided.
To add a description to a virtual disk
Add an access target to a virtual disk to connect the disk to an existing target
Server ISCSI program ready to complete
PC6:
Locate the ISCSI initiator in the start - management tool
Find the Discovery Portal input server in the discovery bar IP Address 192.168.10.1
Windows Server 2008r2 Configuration ISCs Storage