Windows Server 2008 R2/windows 7 admin Seven WDS client boot installation

This article in the original architecture to add a bare metal, network card support PXE boot, other with the general bare metal no difference, not installed operating system, this bare metal from the network of WDS to install the image to install the Windows7 flagship version!

This article only describes from the network is not Windows 7 flagship, the deployment of Vista and similar to this series, in the end of this article you can go to the experiment to deploy Vista, deploy XP SP3 please refer to the original works of Qianshan Island: Rapid deployment of Windows XP SP3, deployment XP, Because XP is not a WIM file, you need to capture it as a WIM, just a few more steps.

This article also has a glitch, a 3096kb boot.sdi file, WDS in the reading time incredibly spent 2 hours, too bt, I was depressed. The following addresses this problem, originating from the compatibility of the virtualization VBox, and replacing the virtual machine with VMware. The boot mirroring speed is normal.

Start the business.

Booting from the network from the BIOS setting

Requires pressing F12 to start the network service, which is set in WDS, and normally, we click on the F12 on the keyboard to continue the operation,

Look at the WDS server properties with a PXE boot policy that you can change to do not need to press f12!