Windows modifies Remote Desktop default port

By default, the remote port for Windows is 3389.

If modifications are required,

You can use the following method:

Modifying a remote Desktop port requires two steps:
1. Open the Registration form [Hkey_local_machine-system-currentcontrolset-control-terminal SERVER-WDS-RDPWD-TDS-TCP],
Modify the value of the right portnamber, whose default value is 3389 (decimal), which is modified to the desired port, for example, 3388
2. Open the Registration form [Hkey_local_machine-system-currentcontro1set-control-terminal SERVER-WINSTATIONS-RDP-TCP],
Modify the value of the right portnamber, whose default value is 3389 (decimal), which is modified to the desired port, for example, 3388
　　
Attention:
1, after the revision of the need to restart the effective
2. If the firewall is turned on, be careful to re-allow 3388 ports.

This article is from the "WINDOWS2008NTP Server" blog, so be sure to keep this source http://sllikp.blog.51cto.com/2811344/1639066

Windows modifies Remote Desktop default port