Windows NPS provides RADIUS services for H3c&cisco

Windows 2008 and 2012 are embedded with NPS, which can be used as a RADIUS server,

Parameters are similar to Freeradius, with few guides and few documents

The next major record is

1. NPS provides Telnet authentication service for CISCO&H3C

2. IPSec user authentication (test, gradual completion)

The Network Policy and Access Services include the following role Services:network Policy Server (NPS) Health registration Authority (HRA) Host credential Authorization Protocol (HCAP) RADIUS Server and Proxy

• 
  

1. Windows NPS for CISCO telnet authentication

Refer to this post specifically

Cisco IOS Radius authentication with Windows Server, NPS

The key is this paragraph:

Next you'll need to add a Vendor specific Attribute by clicking on "Vendor specific" under the left side settings and CL Icking The Add ... button

Scroll down the list and select "Cisco-av-pair" and click Add. You'll be prompted to add the Attribute information, where you'll click Add ... and set the Attribute value as shell:priv- Lvl=15

This specifies which privilege level was returned to the authenticating User/device after successful authentication. For Network Engineers This would is shell:priv-lvl=15 and the Network support technicians would use shell:priv-lvl=1

2. Freeradius for H3C/HP Comware 7 telnet authentication

Refer to this document for details

Freeradius AAA Comware 7

The parameters are basically the same, the only difference is the way the shell is written,

e.g.

Shell:roles=\ "Nework-operator\"

3. Using Windows Server as a RADIUS Server for a Cisco ASA

Windows 2008 under NPS and Windows 2012 are similar, you can refer to the following

http://fixingitpro.com/2009/09/08/using-windows-server-2008-as-a-radius-server-for-a-cisco-asa/

4. Windows NPS for Cisco L2TP IPSEC VPN

Specific configuration refer to the following link

Http://adminboard.mcsm.eu/index.php/guides/other/43-cisco-l2tp-ipsec-tunnel

Http://adminboard.mcsm.eu/index.php/guides/windows/45-windows-nps-kerberos-for-cisco-vpn-l2tp-ipsec

There's a freeradius under it.

http://safesrv.net/setup-l2tp-over-ipsec-to-authenticate-off-freeradius-on-ubuntu-11-10/

5. EZVPN

Windows NPS has been written by someone I post

http://xuchenhui.blog.51cto.com/769149/1386652

Under the Freeradius:

Cisco EzVPN with Freeradius

Http://stevehaskew.blogspot.com/2014/09/cisco-ezvpn-with-freeradius.html

This article from "Mininer" blog, declined reprint!

Windows NPS provides RADIUS services for H3c&cisco