Wireless Environment + All-in-One Machine (52) + Lenovo legend Software

A recent project is very disgusting. I have not solved the problem many times, and finally solved the problem with help. I have nothing to worry about today, we hope that you will be able to help in the future when encountering similar problems and avoid detours.

The environment is as follows:

Wireless AP: AP7110DN-AGN wireless Controller:  L-AC6605-16AP

Vswitch:  S5700-28P-LI-AC router: ar0m0022ba00

650) This. width = 650; "Title =" jietu. jpg "src =" http://s3.51cto.com/wyfs02/M02/38/1B/wKioL1OzW9OwVoklAADN1UD1TL8657.jpg "alt =" wkiol1ozw9owvoklaadn1ud1tl8657.jpg "/>

The configuration process is as follows:

Vro Configuration:

<Router> dis Cu
[V200r003c01spc900]
#
Sysname Router
#
SNMP-Agent local-engineid 800007db034846fbdd5110
SNMP-agent
#
HTTP timeout 3
#
Drop illegal-Mac alarm
#
WLAN ac-global carrier ID other ac id 0
#
DHCP enable
#
Undo DHCP server BOOTP
#
PKI realm default
Enrollment self-signed
#
#
ACL number 2000
Rule 5 Permit source 192.168.1.0 0.0.255 configure ACL
#
IP pool ip-pool1
Gateway-list 192.168.1.1
Network 192.168.1.0 mask 255.255.255.0
Excluded-IP-address 192.168.1.2 192.168.1.10 configure DHCP address pool and other related information
Lease day 999 hour 0 minute 0
DNS-list 202.99.160.68
#
Aaa
Authentication-scheme default
Authorization-scheme default
Accounting-scheme default
Domain default
Domain default_admin
Local-user admin password cipher % $ = I ~> XP & Ay + * 2cevcs-a23uwe % $
Local-user admin service-type HTTP
#
Firewall zone local
Priority 64
#
Nat address-group 1 10.48.183.249 10.48.183.249 Nat address
#
Interface gigabitethernet0/0/0
#
Interface gigabitethernet0/0/1
IP address 192.168.1.1 255.255.255.0 configure the Intranet interface IP Address
DHCP Select Global
#
Interface gigabitethernet0/0/2
IP address 10.48.183.241 255.255.255.0 configure Internet interface address and address ing
Nat outbound 2000
#
Interface cellular0/0/0
Link-Protocol PPP
#
Interface cellular0/0/1
Link-Protocol PPP
#
Interface null0
#
Interface loopback1
#
IP route-static 0.0.0.0 0.0.0.0 10.48.183.254 configure the default static route
#
User-interface con 0
Authentication-mode password
Set authentication password cipher % $ v) euqb: [email protected] @ DQ> SCSI] 8 _~ (,. 6ebgw1t <1ndk (Bi * miy) 4I. 6 h, % $
User-interface vty 0 4 configure remote telnet login
#
WLAN AC
#
Voice
#
Diagnose
#
Return

 

Switch configuration:

<Switch> dis Cu
#
! Software Version v200r001c00spc300
Sysname Switch
#
VLAN batch 100 to 101 800 configure communication VLAN and Management VLAN
#
Undo HTTP server enable
#
Aaa
Authentication-scheme default
Authorization-scheme default
Accounting-scheme default
Domain default
Domain default_admin
Local-user admin password cipher % $ i6.asv) hjet, P "DN. ym % 3axo % $
Local-user admin service-type HTTP
#
Interface vlanif1
#
Interface gigabitethernet0/0/1
Port Link-type trunk
Port trunk pvid vlan 800
Port trunk allow-pass VLAN 101 800
#
Interface gigabitethernet0/0/2
Port Link-type trunk
Port trunk pvid vlan 800
Port trunk allow-pass VLAN 101 800 configure the interface mode for the switch to connect to the Wireless AP
#
Interface gigabitethernet0/0/3
Port Link-type trunk
Port trunk pvid vlan 800
Port trunk allow-pass VLAN 101 800
#
Interface gigabitethernet0/0/4
Port Link-type trunk
Port trunk pvid vlan 800
Port trunk allow-pass VLAN 101 800
#
Interface gigabitethernet0/0/5
Port Link-type trunk
Port trunk allow-pass VLAN 101 800 interface mode for configuring a switch to connect to a wireless Controller
#
Interface gigabitethernet0/0/6
#
Interface gigabitethernet0/0/7
#
Interface gigabitethernet0/0/8
#
Interface gigabitethernet0/0/9
#
Interface gigabitethernet0/0/10
#
Interface gigabitethernet0/0/11
#
Interface gigabitethernet0/0/12
#
Interface gigabitethernet0/0/13
Port Link-type access
Port default, VLAN 101
#
Interface gigabitethernet0/0/14
Port Link-type access
Port default, VLAN 101
#
Interface gigabitethernet0/0/0/15 configure the interface mode for the switch to connect to the server
Port Link-type access
Port default, VLAN 101
#
Interface gigabitethernet0/0/16
Port Link-type access
Port default, VLAN 101
#
Interface gigabitethernet0/0/17
#
Interface gigabitethernet0/0/18
#
Interface gigabitethernet0/0/19
#
Interface gigabitethernet0/0/20
#
Interface gigabitethernet0/0/21
#
Interface gigabitethernet0/0/22
#
Interface gigabitethernet0/0/23
#
Interface gigabitethernet0/0/24
#
Interface gigabitethernet0/0/25
#
Interface gigabitethernet0/0/26
#
Interface gigabitethernet0/0/27
#
Interface gigabitethernet0/0/28
#
Interface null0
#
Interface loopback1
#
User-interface con 0
Authentication-mode password
Set authentication password cipher % $ % [email protected]) [email protected] =! S> W, G> 5 dogs, @ 68! % P, d {o) k'f!> MD ~ % $
User-interface vty 0 4
User-interface vty 16 20
#
Return

 

Wireless controller Configuration:

[V200r003c00spc300]
#
Sysname AC-LSW
#
SNMP-Agent local-engineid 800007db03dcd2fc9af55a
Undo SNMP-Agent community complexity-check disable
SNMP-agent
#
The HTTP server enable enables the HTTP service to access the wireless controller through web.
HTTP secure-server enable
#
Info-center timestamp log format-Date
#
VLAN batch 101 800 new corresponding VLAN
#
DHCP enable
#
DiffServ domain default
#
PKI realm default
Enrollment self-signed
#
Drop-profile default
#
Aaa
Authentication-scheme default
Authorization-scheme default
Accounting-scheme default
Domain default
Domain default_admin
Local-user admin password cipher % @ 4sd! O # B "ve '% R> 6/V7] [email protected] %@% @
Local-user admin privilege level 15
Local-user admin service-type HTTP configuration Web login user
#
Interface vlanif1
#
Interface vlanif101
IP address 192.168.1.18 255.255.255.255.0 configure remote management address
#
Interface vlanif800
IP address 172.1.1.1 255.255.255.0 configure the management address pool of the Wireless AP and send the IP address to the AP through DHCP
DHCP Select Interface
#
Interface meth0/0/1
IP address 192.168.0.1 255.255.255.0 the IP address of the configuration management interface to upgrade the system version.
#
Interface gigabitethernet0/0/1
Port Link-type trunk
Port trunk allow-pass VLAN 101 800 set the port type and allowed VLAN of the interface connecting to the switch
#
Interface gigabitethernet0/0/2
#
Interface gigabitethernet0/0/3
#
Interface gigabitethernet0/0/4
#
Interface gigabitethernet0/0/5
#
Interface gigabitethernet0/0/6
#
Interface gigabitethernet0/0/7
#
Interface gigabitethernet0/0/8
#
Interface gigabitethernet0/0/9
#
Interface gigabitethernet0/0/10
#
Interface gigabitethernet0/0/11
#
Interface gigabitethernet0/0/12
#
Interface gigabitethernet0/0/13
#
Interface gigabitethernet0/0/14
#
Interface gigabitethernet0/0/15
#
Interface gigabitethernet0/0/16
#
Interface gigabitethernet0/0/17
#
Interface gigabitethernet0/0/18
#
Interface gigabitethernet0/0/19
#
Interface gigabitethernet0/0/20
#
Interface gigabitethernet0/0/21
#
Interface gigabitethernet0/0/22
#
Interface gigabitethernet0/0/23
#
Interface gigabitethernet0/0/24
#
Interface xgigabitethernet0/0/1
#
Interface xgigabitethernet0/0/2
#
Interface Wlan-Ess0
Port hybrid pvid vlan 101
Port hybrid untagged VLAN 101 configure the WLAN-ess Virtual Interface
#
Interface null0
#
IP route-static 0.0.0.0 0.0.0.0 192.168.1.1 configure the default route for Remote Management
#
User-interface con 0
Authentication-mode password
Set authentication password cipher % $ "GCEA {F! GFFR9-UtLm # Y,;,-8xu 'x ~ H8 =; M/; zhzm/B;, 0, % $ configure console interface Authentication

User-interface vty 0 4
Authentication-mode password
User Privilege level 15
Set authentication password cipher % $ VR '(l4quvi ^ ojos1 ^ jg7 ~. ZM> [& xdt .~ Xuj & p.1uj [NY. ZP ~ % $
User-interface vty 16 20 configure vty interface authentication for Remote Management
#
WLAN
WLAN ac source interface vlanif800 configures the management VLAN of the Wireless AP
AP-auth-mode no-auth
Ap id 4 type-ID 28 Mac 04f9-38e8-6f80 Sn 210235555310e3000596 Add corresponding Wireless AP
Ap id 5 type-ID 28 Mac 04f9-38ea-35a0 Sn 210235555310e3000992
Ap id 6 type-ID 28 Mac 04f9-38e5-78a0 Sn 210235555310e3000446
Ap id 7 Type-ID 28 Mac 04f9-38ea-35c0 Sn 210235555310e3000993

WMM-profile name -ap id 0 configure vmm-profile name
Traffic-profile name -ap id 0 configure traffic-profile name

Security-profile name -ap id 0 configure security-profile name
Security-policy wpa2: configure the security template authentication method
Wpa2 Authentication-method PSK pass-phrase cipher % @ bkz | % dyw "rfrgoe '@ [email protected] %@%@ encryption-method CCMP configure the encryption method and the corresponding method of Wireless AP password (will affect the network speed)

Sta-load-balance enable Server Load balancer

Service-Set Name ID 0 configure service set Template
Forward-mode Tunnel
WLAN-ess 0
Configure the SSID as dhjs208
Traffic-profile ID 0
Security-profile ID 0
Service-VLAN 101 service vlan101
Radio-profile name -ap id 0
Radio-type 80211n sets the radio type to 802.11n, so that only the speed of the NIC can reach 133 Mbps. If the speed is not set, the network speed will be affected.

WMM-profile ID 0

AP 4 radio 0
Radio-profile ID 0
Service-Set ID 0 WLAN 1
AP 5 Radio 0
Radio-profile ID 0
Service-Set ID 0 WLAN 1
AP 6 Radio 0
Radio-profile ID 0
Service-Set ID 0 WLAN 1
AP 7 Radio 0 configure the Service Set radio-profile applied by the AP
Radio-profile ID 0
Service-Set ID 0 WLAN 1

#
Return

 

This article is from the "idle" blog and is not reposted!