Wireless Router Configuration Internet

Now the smartphone more and more people are using, at home naturally can not be less equipped with a wireless router, here I introduce how to configure the home router, this router is configured using the Web interface, and many of the small and medium-sized routers are web interface, so the configuration method is also the same, Here I use Tp-link as an example to configure.

Using the Web interface to configure the router requires a computer, a wireless router, with a network cable to the computer's network card, remember to put the network cable to the router's LAN port , if the wireless router can use network cable configuration, you can also use the wireless network configuration, which requires the computer has a wireless card , directly linked to the wireless network in the router, generally speaking, wireless routers are DHCP-enabled, you are connected to the wireless router (PS: Look for the SSID, do not connect the wrong) can obtain an IP address, you can also configure a wireless network and wireless router in a network segment of the IP , if you are not very familiar with the configuration of IP, directly to obtain an IP address do not modify their own. Generally speaking, the bottom of the wireless router is identified with the router's IP address and an account password (this account password is used in the browser login router), Tp-link router IP is basically 192.168.1.1, account password is admin,admin, Different brands are set differently.

Then open the browser in the browser to enter the IP address of the router, that is, 192.168.1.1.

Here, enter the account password provided at the bottom of the router, then click Login.

This is Tp-link's operating interface.

You can configure the router directly by selecting the "Setup Wizard" on the left, or you can configure it directly at the WAN port, and I use the wizard to configure:

Click the "Setup Wizard" button

Next

I want to set the SSID here, is to identify the network of your wireless router is a logo, according to their favorite configuration, and then match the wireless password. Next

Here, if it is a home, you should choose PPPoE (ADSL virtual dial-up) way, is to the cat on the network cable to the router's WAN port.

Enter your ADSL account password, next

Click Reboot

After the reboot, click Run status to see if the WAN port is connected, if connected to the following figure:

This is done:)