Wireless Router setting does not require human access

At last, I had my smartphone and Ben, so I had no wifi? The dream of surfing the Internet in bed. As a result, wireless routers have become essential devices in the family. However, how routers access the network has become the biggest headache for some netizens. After several installation attempts, I have summarized the method for installing a wireless router in the LAN, hoping to help those who will install a wireless router.

Step 1: connect a Wireless Router

Connect LAN lines to the "WAN" Port of the wireless router. Generally, the router has several network cable interfaces, which are divided into two colors. The color of one port is different from that of other ports, this is the "WAN" port. Use a cable with a crystal head at either side of a 1-meter pair, one end is inserted into the NIC of the home computer that previously had access to the Internet, and one end is inserted into any other port of the router. Power on the wireless router.

The following figure shows the connection of a wireless router:

Step 2: computer settings

Open the connected home computer, right-click "Network neighbors" on the desktop, and select "properties"

Double-click "Local Connection"

Click "properties" in the window that opens"

Double-click "internet Protocol (TCP/IP )"

"Automatically obtain IP addresses" and "automatically obtain DNS server addresses ". Click "OK" to close all windows.

Step 3: configure the Wireless Router

Open your browser, enter "192.168.1.1" in the address bar, and press "enter" to enter the vro logon page. enter the user name and password to enter the vro settings page (the vro is tagged with a user name and password ).

Open "Network Parameters" at the far left of the interface"

First, set the "LAN port" and update the IP address to "192. 168. *. 1". Here * is any number. Generally, it can be set to a value less than 10. Save it after it is finished. Then, the vro restarts and operates according to the router prompt. If it cannot be restarted automatically, You need to restart it manually. In this case, enter "192. 168. *. 1" in the browser to log on to the vro and perform the following settings.

Next, set the WAN port. on this page, you need to fill in the data previously entered in the home computer, that is, the IP address allocated to you in the LAN, and other data, save the settings.

If the LAN is bound to the MAC address and IP address, you also need to clone the MAC address of the home computer to the MAC address of the router. Click "clone MAC address". After cloning, the number in the box below will be copied to the box above, and then saved. Restart the vro。 according to the router prompt.

Set the name and password of the wireless router.

Open "Wireless Settings" on the far left of the interface, and click "Basic settings". The "SSID" here is the name of the wireless router. You can set it as needed and save it. This name will be displayed when you use this book to search for signals on the Internet.

"Wireless Security Settings", enter your own password in "PSK password", and save the settings.

After the vro name and password are set, the vro must be restarted to take effect.

Open this book and select your vro. enter your password to access the Internet.