Wireless router When switch use: Wireless router to do switch setup tutorial

Preparation Tool:

1, a cat (no line from)

2, computer (to have network)

Cat

Specific steps:

1, the general normal routing is to connect the WAN, but this is used as the exchange of the LAN port, where the mouth can be randomly connected without row order, has been tested. Line connection is from the cat out of the line to connect the LAN mouth of a random mouth and then lead a line into the LAN mouth one by one, the other connected to the computer.

Connect Network

2, the first broadband connection, and then to the network connection to share the broadband connection to the local connection

Modify IP Address

3, share to the local connection after the local connection to their favorite IP, but can not be the same as the route, where the routing gateway address is 192.168.1.1 so green Tea Small series on the local connection to 192.168.1.2. This is the use of the system NAT routing function, the data forwarding. From a broadband connection to a local connection, because only one network card, the broadband connection is virtual out, so that the sharing of data is slower than the original.

4, after sharing the local connection becomes a gateway. Other hosts want to surf the Internet are through this machine. As long as the other computer IP to the same network segment, IP not the same, the gateway to fill the top of the host IP can be online. Because the computer has become a network switch.

Green Tea Small series of reminders: Other machine lines connected to the switch interface to the IP address of the local connection, with wireless network connection on the wireless connection to the IP address!

Process Small series of this wireless router when the switch is used to set the method is not very simple? You can try it!