Wireless network card How to use, wireless network card use method

Wireless network card is the device of the terminal wireless networks, which is a wireless terminal equipment which is used on the Internet through the wireless network under the wireless LAN coverage. Wireless card with its compact, easy to carry and so on to win a lot of netizens love. So how does the wireless card use? Many friends do not understand the specific use of wireless card procedures. The following small series for everyone to explain the use of wireless network card method.

Small series will be connected to the wired broadband machine called the host, the other machine called from the machine. In order to make a distinction between the two machines, so that we can better understand.

　　How to use wireless card one: Make sure the two machines are in the same workgroup

This is often ignored by people, because many machines default workgroup is the same, so do not have no harm to set, but in order to enable us to more clearly use the wireless network card procedures, small series or here to remind you. If the machine does not default on the same workgroup or need to set it again. The detailed steps are: My Computer → properties → computer name → change → select workgroup → set to mshome (or other, as long as two machines can be as well) → OK → sure. If the two machines have not been set up in the same workgroup, you can try to focus on the Kai.

　　How to use the wireless network card two: Connect Wireless LAN

Right-click the wireless network connection status indicator icon on the right side of the taskbar, select View available wireless connections, and then click Change Advanced Settings in the dialog box that pops up, and go to the Wireless Network connection Properties page (or select the Wireless network connection properties directly from the Network Neighborhood), in the wireless network configuration option, click the Advanced button in the lower-right corner, and in the page that appears, change the network to access option, change any available network to computer only, and select the Automatically connect to non-preferred network option and press close to end this step. Both laptops are required to perform this procedure.

Then select the notebook computer as the host, and on the Wireless Network Configuration page, click the Add button under Preferred networks. Eject the wireless network properties and enter a flag in the Service Settings flag (SSID) field. The entered flags can be defined by themselves, such as "001", and the "Automatically give me the key" check mark removed, the data encryption option changed to "Disabled", and then click "OK" button to exit. Then, on the preferred network, the "001" network that you just set up appears.

On the computer, right-click the wireless network connection status indicator icon on the right side of the taskbar, and then you can see that you have a free wireless network marked "001" in the pop-up "Connect to Wireless Network" dialog box, and then click the "Connect" button.

　　How to use wireless card three: Open Host network share (ICS) set up a host's network for sharing

Here to note that if it is LAN broadband or any need to dial the community broadband, direct sharing local connection, but if you are ADSL dial-up Internet, you need to share a dial-up connection, not a local connection, this is very important. At the same time, select Home Network Connections under shared open for a wireless network that needs to be shared.

　　How to use wireless card four: set host IP address from machine

This is also a very important point, the results are not really complicated. Open two machine wireless connection Properties--TCP/IP bar, set host: IP address is 192.168.0.1, subnet mask default 255.255.255.0, Gateway blank, DNS blank; set from machine: IP address 192.168.0.8, Subnet mask default 255.255.255.0, Gateway 192.168.0.1,dns fill the host Wired broadband service provider DNS, do not know can be at the beginning of the host-run--cmd--ipconfig/all view.

Finally, open IE, in the Internet Options, select the connection, and then set up the LAN, using automatic configuration, using a proxy server, all set to 192.168 0.1, the other port with 808, socket with 1080.

Read a small series for everyone to clean up the use of wireless card, we will just buy back the wireless card how to use and worry about it? Quickly follow the small part of the way to teach you to try it.