X3 printing server configuration error Solution

To reconfigure the printing server, follow these steps:

1. Delete the printing server added to the console;

2. Open "Add/delete programs" in windows, uninstall the installed SrvEdi component, and go to the installation directory of the original printing server, for example, C: \ SAGE \ SAGEX3V5 \ X3V53 \ srvedt) check whether there are any residual folders. If there are any residual folders, manually delete them;

3. Open the windows Start Menu-control panel, find Regional and Language Options, and set the standard and format (Standards and formats) of the region tab) "," Location ", and" Language for Non-Unicode Programs "in the Advanced tab are set to" French "-French (France) "," France "," French France "-French (France)", you may need to insert a windows installation disc into the optical drive, and click "Apply) "-OK. The system will be restarted and the server will be restarted as required;

4. After the restart is completed, run the installation program of the printing server in x3. follow the prompts to complete the installation;

5. Go to the Console and configure the server and Solution/Folder publication according to the server configuration instructions;

6. After the configuration is complete, re-run step 3, change the region code in the region and language options back, restart the system, and print that the server has been installed and configured.

7. Note: The entered svcuser/svcpassword can be left blank. We recommend that you enter the username created for the X3 service in windows, for example, adonix ).

So far, the problem of printing server configuration has been solved.