Zebra 105SL Printer How to hand-Test paper?

　　Zebra 105SL Barcode printer Its classic reliable quality, durability is famous in the world. Because of these, so many of us will choose to buy zebra barcode printer, and Zebra barcode printer lightweight and metal shell, not only can move, but also to resist the harsh environment, its new built-in scroll function, but also the printed label back scroll, to avoid contamination. This one of the advantages so that everyone can not resist its charm, Zebra barcode printer Economic benefits will be everyone's best choice!

As a loss, zebra barcode printer, even if it is excellent, but also there will be problems, Shenzhen Trust Heng Technology in the long-term sales, the use of Zebra barcode printers, the Zebra 105SL Industrial Vault Printer manual paper method, summed up below, and the adjustment method, This method is suitable for people who are familiar with the use of barcode printers and would like to help our users to use the Zebra machine.

1, the boot state, select the Setup/exit key into the printer menu;

2, continue to select Next/save key until the media and RIBBON calibrate option is displayed;

3, select "+" key, display load backing prompt;

4, open the print head, peel off some labels, keep about 200mm of the base paper, and then send back to the printer, at this time, through the sensor only exists between the bottom of the paper;

5, print head remain open, select the "+" button, display remove ribbon hint. If you use a ribbon, remove it and close the print head. Select "+" to display the calibrating please wait for a few seconds to display the reload all prompt.

6. Open the print head and move the label forward until the label is in the middle of the penetrating sensor and if the Ribbon is used, reinstall it. Finally, close the print head. Select the "+" key and the printer will perform an automatic calibration process.

7, after the automatic calibration, first select the Setup/exit key, and then select the Next/save key, exit the Settings menu, select the Pause key to exit the paused state, and then use the feed key to determine the calibration of the label, the process of calibrating the Ribbon successfully.

The above method of measuring paper is suitable for manual use of equipment maintenance, belong to the more advanced method of measuring paper, most users still rely on 105SL automatic paper or software methods to test paper to detect, if encountered through the above method still does not solve your problem, you can contact your suppliers to obtain relevant technical support!