Zigbee debugging Problem Error[e12]: Unable to open file ' lnk51ew_cc2530b.xcl '

The following error resolution occurs when compiling a ZigBee program using IAR Embedded Workbench:

ERROR[E12]: Unable to open file ' C:\Program files\iar systems\embedded Workbench 5.3\8051\config\lnk51ew_cc2530f256.xcl ‘

The error should not be found in the config file.

Here's how to fix it:

If you are a win7 system and are 64-bit, then you need to modify the link path, the use of 32-bit system when the installer is the default in \program Files, if it is a 64-bit system, then the default location should be \program Files (x86) Therefore, you need to modify the config path. In general, the file can be found under the following path

C:\Program Files (x86) \iar systems\embedded Workbench 6.0 Evaluation\8051\config\devices\texas instruments\lnk51ew_ Cc2530f256.xcl

Depending on the software loading path, there may be a slight difference.

The steps are as follows:

1) Right click on Project Select option ...

2) Find Linker->config

3) Modify linker command file

C:\Program Files (x86) \iar systems\embedded Workbench 6.0 Evaluation\8051\config\devices\texas instruments\lnk51ew_ Cc2530f256.xcl

Re-make to resolve the error.

Zigbee debugging Problem Error[e12]: Unable to open file ' lnk51ew_cc2530b.xcl '